Switch Dial Operation Ch3 Ch4 - FUTABA 4GRS Instruction Manual

Switch Dial Operation CH3 CH4

(CH3: Switch SW2, CH4: Dial DL1)
The three-position switch SW2 will result in the servo arm moving to three differ-
ent positions when operated.
Note that this function cannot be assigned to the spring return switch SW1.
Rotating the Dial (DL1) will proportionally control a servo on CH4.
switch and DL1 dial can be assigned to either function.
Switch（SW2） Dial（DL1）
3position
SW2 3CH Servo
Switch（SW1） The function cannot
Return be assigned to SW1
Initial setting
T4GRS beeps when the
dial reaches center and
limit position.
•The servo arm position and dial
Operation of CH3 can
be checked.
Operation of CH4 can
be checked.
DL1 4CH Servo
do not necessarily always match
exactly.
T he SW2
23