Stick Tension Adjustment - FUTABA 4GRS Instruction Manual

Stick Tension Adjustment

Make this adjustment when you want to change the steering stick or throttle stick
spring tension.
Adjustment
1
Remove the battery from the transmit-
ter.
2
Using Phillips screwdriver, as shown in
a figure, four screws are removed, and
a rear case is removed.
• Don't touch internal electronic components.
3
Turn the adjusting screw using a small
Phillips screwdriver such as a watch-
maker's screwdriver.
• Turning the adjusting screw clockwise, in-
creases the spring tension.
• The adjustment range is about five turns in
both directions, from the initial position.
Steering stick adjusting
screw
4
When the adjustment is completed, re-attach the rear case with a Phillips screwdriver.
• Take great care not to damage the wiring when re-attaching the rear case.
• Foreign substances must not be allowed to get into the interior of the case.
Caution
If turned too far counterclockwise, the adjusting screw may fall out.
26
Throttle stick adjusting
screw
Rear case