System Functions "System - FUTABA 4GRS Instruction Manual

Digital proportional r/c system
Hide thumbs Also See for 4GRS:
Table of Contents

Advertisement

System Functions "SYSTEM"

The graphic liquid crystal screen display mode, buzzer sound and menu character mode,
etc. can be set.
- "CONTRA"---Liquid crystal screen contrast adjustment (20 steps)
- "BK-LHT"---Liquid crystal screen backlighting display mode setup
(OFF, ON at button operation, normally ON)
- "LHT-TM"---Setting of ON time (1~30 secs) when [ON at button operation] was selected above.
- "LHT-PM"---Liquid crystal screen backlighting brightness adjustment (30 steps)
- "BATT"---Battery type setting (LiFe2/NiMH5/DRY4)
The T4GRS can use an optional rechargeable battery. However, the battery alarm setting is dif-
ferent from that of the dry cell battery (alkaline battery recommended). Therefore, always set the
battery type to match the power source used.
If used with the incorrect setting, the normal low battery alarm function will not work and the sys-
tem may stop before a battery alarm is generated. The usage time may also become extremely
short.
- "BUZZER"---Buzzer sound tone adjustment (OFF, 100 steps)
- "OPE-TM"---Alarm Setting if Tx is left switched ON (OFF, 10 m)
- "MENU"---Item which displays the basic menu screen in katakana characters for Japanese use.
- "TH-STK"---This is used, when the neutral adjuster of throttle stick is changed, or when it is
changed into ratchet.(5:5, 7:3, F10)
- "DISP"---HOME screen display mode setting (Telemetry data, Timer, Users name)
Display "SYSTEM" screen by the following method:
(HOME screen)
Press
System function setup
1
(Setting of each item)
(Adjusting the liquid crystal contrast)
Select the setting item "CONTRA" using the
(JOG) button, and use the (+) and (-) buttons to
adjust the screen contrast.
- Adjust to an easy-to-see contrast.
When completed, return to the MENU2 screen
by pressing the (JOG) button.
(MENU 1 screen)
(MENU 2 screen)
Press
System Functions "SYSTEM"
(SYSTEM screen)
Press
Select
Press
"SYSTEM"
Adjustment buttons
- Use the (+) and (-) buttons to
make adjustments.
- Press the (+) and (-) buttons si-
multaneously (approx. 1 sec) to
SYSTEM
return to the initial value.
[ RT ]
CONTRA
0
Contrast (CONTRA)
BK-LHT
ALL
-10~0~+10
LHT-TM
10s
LHT-PW
15
Initial value: 0
BATT DRY4
BUZZER
65
OPE-TM
OFF
MENU
ENG
TH-STK
5 5
DISP
TLMTR
SYSTEM
RT
CONTRA
0
BK-LHT
ALL
LHT-TM
10s
LHT-PW
15
BATT DRY 4
BUZZER
65
OPE-TM
OFF
MENU
ENG
TH-STK
5 5
DISP
TLMTR
109

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

T4grs

Table of Contents