Receiver and Servo Connections
Connect the receiver and servos as shown below. Connect and install the receiver and
servos in accordance with "Installation Safety Precautions" on the next page.
The figure shown below is an example. The method of connecting the motor controller
to the motor and battery depends on the motor controller used. Purchase the motor con-
troller and servos separately. The receiver also depends on the set.
Installation When An Electronic Speed Control Is Used
Installation For Gas Powered Models
Receiver
To Battery
Installation
CH3
CH4
CH1
CH2
B/C
Switch
CH4 servo
CH3 servo
Throttle servo
Steering servo
33