Throttle Mode Check; Trims Initial Set-Up - FUTABA 4GRS Instruction Manual

Throttle Mode Check

The throttle servo travel can be set to 5:5 or 7:3 for throttle stick operation as required
by the throttle mode function .
F5/B5 or F7/B3

Trims Initial Set-Up

- Steering trim (DT1) check
On the initial set-up, steering trim is assigned to the DT1 trim lever. Operate the lever
and make sure the marker moves on the ST graph. If default has been changed, test
steering trim in its new location. After checking the trim, set the trim display to the cen-
ter (N) position.
- Throttle trim (DT2) check
On the initial set-up, throttle trim is assigned to the DT2 trim lever. Operate the lever
and make sure the marker moves on the TH graph. If the default has been changed, test
the throttle trim in its new location. After checking the trim, set the trim display to the
center (N) position.
Throttle trim (DT2)
*This function is not available in "TH-STK : F10 mode".
F5/B5
5 : 5
Forward side Brake side
Steering trim (DT1)
F7/B3
7 : 3
Forward side Brake side
Steering trim
Throttle trim
41