A.b.s. Function "Th A.b.s - FUTABA 4GRS Instruction Manual

A.B.S. Function "TH A.B.S"

When the brakes are applied while cornering with a 4 Wheel
Drive or other type of vehicle, understeer may occur. This under-
steer can be eliminated and cornering improved using this func-
tion.
Operation
- When the brakes are applied, the throttle servo will pulse
intermittently. This will have the same effect as pumping the
brakes in a full size car.
- The brake return amount, delay amount, pulse cycle, and
brake duty can be adjusted.
Operation display
During ABS operation, the LED blinks.
Display "TH A.B.S" screen by the following method:
(HOME screen)
Press
- AB.P : Amount of brake return
Sets the rate at which the servo
returns versus stick operation
for brake release. When set to
0%, the ABS function is not
performed. When set to 50%,
the servo returns 50% (1/2) of
the stick operation amount and
when set to 100%, the servo re-
turns to the neutral position.
*This function is not available in "TH-STK : F10 mode".
(MENU 2 screen) (MENU 1 screen)
Press
Setup items
MODE : Function ON/Off
AB.P : Brake return amount
DELY : Delay amount
TG.P (Starting point)
A.B.S. Function "TH A.B.S"
(Throttle system)
Press
Select
"TH A.B.S"
CYCL
TG.P
DUTY
A.B.S
DUTY (duty): X and Y ratio
X: (Brake application time)
Stick operation
Without A.B.S.
With A.B.S.
(TH A.B.S screen)
Press
: Cycle speed
: Starting point
: Cycle duty ratio
Y: (Brake return time)
AB.P
(Amount of
brake return)
CYCL (Cycle)
67