Information Screen; Comfort Heat Setup Wizard - Harsco Industrial SC-1500 Owner's Manual

3.11.4 Information Screen

The Information Screen contains real-time read-only boiler
values such as temperatures, relay states, etc. Scroll
through the Information Screen by sliding your finger up or
down.
This screen is helpful to determine the operating
characteristics of the boiler.
For more information on any value, please
refer to the NURO Boiler Controller:
Advanced User's Guide, Part Number is
1004905979.

3.11.5 Comfort Heat Setup Wizard

From the Home Screen, press the
"Settings" will load the Main Menu
Screen shown at the right.
Touch the "Comfort Heat Wizard" to
launch the Setup Wizard screen shown
at the far right.
The first step of the Setup Wizard is to
assign functionality to the user-
configurable Relays A thru D. Touching
one of the Relay buttons will bring up the
Relay Assignment Screen. This screen
allows the user to assign functions like
"Boiler Pump", "System Pump", "Flame
Detected" and "Air Damper" to the relays.
The relay assignments must agree with the wiring to/from the boiler. For
example, if Relay A is user-configured to enable/disable the Boiler Pump, the
control wires to operate the boiler pump must be properly wired to the Relay A
terminals in the High Voltage (TB2) terminal block. Press the "Next" button to
continue.
NOTE
P-K SONIC
T T T T echnical Service 1.877.728.5351 echnical Service 1.877.728.5351 echnical Service 1.877.728.5351 echnical Service 1.877.728.5351
NOTE
TM
Gas Fired Boiler