3.11 Initial NURO Control Setup and Adjustment
3.11.1 Introduction
This section covers basic NURO control setup and adjustment. For a basic walkthrough of the control setup,
please refer to the NURO Getting Started Guide which is helpful for basic boiler installations. For more
complex boiler applications and more information on the parameters, please refer to the NURO Advanced
User's Guide.
3.11.2 Startup
When the boiler is powered on, the NURO
touchscreen will display an initial Startup
Screen then the Local Representative
screen. This shows the name, address
and phone number of the local HARSCO
Industrial representative.
3.11.3 Home Screen
After a brief time, the Local Representative information
screen will timeout displaying the Home Screen. The
Home Screen shows a snapshot of the boiler's current
operating conditions:
Outlet (Supply) Temperature
•
Inlet (Return) Temperature
•
Exhaust Temperature
•
Firing Rate, etc.
•
Pressing the "Info" button in the lower left corner will load
the Information screen. See
For the setup wizard, press the "Settings" button in the
lower right corner to load the Information screen. See
Comfort Heat Setup
Wizard.
Information
Screen.
TM
P-K SONIC
Gas Fired Boiler
T T T T echnical Service 1.877.728.5351
echnical Service 1.877.728.5351
echnical Service 1.877.728.5351
echnical Service 1.877.728.5351