Laminator Configuration Label - DataCard SD260L User Manual

If your system includes the optional second laminator (L2), make sure that the
laminator cartridge is always installed even if the cartridge is not loaded with overlay
material. If the cartridge is not in place, cards are not supported as they travel
through the system and can fall into the bottom of the laminator.

Laminator Configuration Label

The laminator configuration label is located inside the laminator beneath the L2 cartridge. Open
the laminator access door and remove the L2 laminator cartridge to see the label. If an L2
laminator is not installed, open the L2 transport access door to see the label.
SD260L/SD360/SD460 Card Printers User's Guide A-5