If your system includes the optional second laminator (L2), make sure that the
laminator cartridge is always installed even if the cartridge is not loaded with
overlay material. If the cartridge is not in place, cards are not supported as they
travel through the system and can fall into the bottom of the laminator.
Laminator Configuration Label
The laminator configuration label is located inside the laminator beneath the L2
cartridge. Open the laminator access door and remove the L2 laminator cartridge
to see the label. If an L2 laminator is not installed, open the L2 transport access
door to see the label.
CD800 Card Printer User's Guide
A-5