DataCard SD260L User Manual page 33

e.
Press the down arrow key until Network IPv6 displays
on line 2.
f.
Press E
3.
Press the down arrow key until the address method used
by your network displays on line 2.
DHCP

SLAAC

Manual

Local

Press E
NTER
The example shows the LCD display for an IPv6 Manual address. DHCP, SLAAC,
and Local addresses behave the same, as does the gateway address for a manual
address.
An IPv6 address is represented as eight groups of four
hexadecimal digits separated by colons. The address
requires 39 characters to display. Because the LCD is limited
to 16 characters per line, the IPv6 address is spread across
three screens of the LCD. You can press either the down
arrow or the E
address. A digit at the end of line 1 indicates which section
of the address is being displayed.
SD260L/SD360/SD460 Card Printers User's Guide
to display the Network IPv6 menu.
NTER
to display the IP address.
key to display the next section of the
NTER
21