103: Printer Problem; 104: Critical Problem; 105: Magstripe Data Error - DataCard SD260L User Manual

103: Printer problem

The printer had an error. The card will be canceled.
1.
Press the printer P
2.
Press the P
Click OK on the PC to clear the message.

104: Critical problem

The printer had a serious error. The card will be canceled.
1.
Press the printer P
2.
Request service.
The system must remain powered off.
Click OK on the PC to clear the message.

105: Magstripe data error

The printer failed to verify that the correct magnetic stripe data was written on the card.
1.
Make sure that you are using magnetic stripe cards that match the printer settings.
2.
Make sure that the cards are placed in the printer correctly.
Press the U button on the printer to clear the message. On the PC, click Retry, or click Cancel to
SER
cancel the card.
H & T
INTS IPS
The card might have been turned the wrong way.

The card might not have a magnetic stripe.

SD260L/SD360/SD460 Card Printers User's Guide
button to power off the printer.
OWER
button again to power on the printer.
OWER
button to power off the printer.
OWER
61