Retrieve The Printer's Network Ip Address; Retrieve An Ipv4 Address - DataCard SD260L User Manual

Hide thumbs Also See for SD260L:
Table of Contents

Advertisement

Retrieve the Printer's Network IP Address

You need to know the printer IP address to perform some tasks. For example, the XPS Card 
Printer Driver asks you to enter the network IP address during installation. You also use the IP 
address when launching Printer Manager, the printer's web interface, from a browser window. 
To display the IP address, you can do one of the following:
Press the up or down arrow key while the printer displays Ready. Refer to "Down Arrow, Up 

Arrow, and Enter Key" on page
Use the LCD menu system Status menu.

The printer supports both IPv4 and IPv6 addressing. Because an IPv6 address is much longer than 
an IPv4 address, the LCD displays the two types of addresses differently.

Retrieve an IPv4 Address

To display an IPv4 address using the Status menu, do the following. You also can display the 
subnet mask, gateway address, and MAC address, if necessary.
Begin with the printer power connected, and the printer connected to the network.
1.
Press the P
2.
Access the Status menu in the LCD menu:
a.
Press the U
b.
Press the E
c.
Press the down arrow to display Status on line 2.
d.
Press E
18
13.
 button (if needed) to power on the printer.
OWER
 button to suspend the printer. 
SER
 key to enter the menu system. 
NTER
 to enter the Status menu.
NTER
Using the System

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sd360Sd460

Table of Contents