IBM Xseries 345 8670 Maintenance Manual page 25

4. Review the information that is displayed in the "Configuration summary" window.
To change the configuration, click Modify arrays.
Figure 2. "Configuration summary" window
5. Click Apply; then, click Yes when asked if you want to apply the new
configuration. The configuration is saved in the controller and in the physical
drives. Exit from the ServeRAID Manager program and remove the CD from the
CD-ROM drive. Restart the server.
Using Customer configuration: To configure your controller manually, select
Custom configuration. Using Custom configuration, you can select which two
physical drives you want to configure and create a hot-spare drive.
Complete the following steps to use Custom configuration:
1. In the ServeRAID Manager tree, click the controller.
2. Click Custom configuration.
3. Click Next. The "Create arrays" window opens.
Chapter 2. Configuring your server
15