TRENDnet TV-NVR104K User Manual
  1. Manuals
  2. Brands
  3. TRENDnet Manuals
  4. Security System
  5. TV-NVR104K
  6. User manual

TRENDnet TV-NVR104K User Manual

4-channel hd poe kit
Hide thumbs Also See for TV-NVR104K:
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading

Related Manuals for TRENDnet TV-NVR104K

Summary of Contents for TRENDnet TV-NVR104K

  • Page 2: Table Of Contents

    Weather conditions ....................13 Advanced Playback ....................9 Video Export ......................9 Basic System Setup ................14 Dynamic DNS Support ..................9 Soft Keyboard Instruction ..................14 IPv6..........................9 Keyboard styles .....................14 ONVIF .......................... 9 © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 3 Rebooting your NVR ....................28 General ........................48 Log out from NVR management ................28 DDNS ..........................49 NTP ..........................49 Camera Settings Menu ................. 29 Email ..........................50 Camera Connection Settings ................. 29 UPnP ...........................51 Camera installations .................... 29 © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 4 Playback buttons ....................80 Remote Upgrade ....................63 Playback operations ....................81 Factory Default ......................64 Playback modes .....................82 Network Monitoring ....................65 Traffic ........................65 Access your NVR with the Web Browser ........85 © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 5 Live View Settings ....................104 Compatible Camera List ..................121 Maintenance ......................105 Regulations ....................122 Network Settings ................. 106 Federal Communication Commission Interference Statement ....122 TCP/IP ......................... 106 FCC Radiation Exposure Statement ............122 © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 6 TRENDnet User’s Guide TV-NVR104K Europe – EU Declaration of Conformity ............123 Safety ........................123 EMC.......................... 123 Directives ......................123 RoHS ..........................124 Power over Ethernet ..................... 124 Limited Warranty ................125 © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 7: Product Overview

    TV-NVR104K Features TRENDnet’s standalone 4-Channel HD PoE NVR Kit, model TV-NVR104K, offers a comprehensive video display, storage, and management solution which features a plug and play PoE camera installation*. The TV- NVR104K comes with a pre-installed 1 TB hard drive and two powerful TV-IP320PI Outdoor 1.3 MP HD PoE IR Network Cameras.

  • Page 8: Tv-Nvr104 Hardware

    8.5 days of recording per camera: 4x cameras with continuous recording at 720p at 30 fps Scheduled Recording Create weekly continuous and motion detection recording schedules for each camera with video overwrite when storage is full © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 9: Advanced Playback

    Night Vision Night vision up to 30 meters (100 ft.) in complete darkness Smart IR Dynamic IR adjustment optimizes night visibility D-WDR Digital Wide Dynamic Range improves video quality in high contrast lighting environments © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 10: Tv-Nvr104 Front View

    Network: Connect to your office or home network for remote access and viewing PoE: Connect 802.3af (15.4W Max.) cameras. Grounding Connect to grounding wire. This is especially Point: important when you install your camera outdoor. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 11: Tv-Ip320Pi Hardware Overview

    Lock Ring: Loosen to adjust the camera position. Tighten to hold the camera position. Ambient Detects the brightness in the environment and Light enable day/night modes automatically. DC Power 12V DC Sensor: IR LEDs: Infra-red LEDs for night vision. (Optional) © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 12: Hardware Installation

    Hardware installation Connecting the power supply TV-NVR104K comes with everything you need to set up a basic network Connect the 48V DC power adapter to the TV-NVR104 power port. surveillance system. Just connect to a monitor or HDTV (not included in Connect the power cables to the power adapters.

  • Page 13: Camera Installation

    Areas with severe temperatures should be avoided when installing the camera. It’s recommended that you use an enclosure with a heater and blower if you plan on using this camera outside of the specified temperature range. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 14: Basic System Setup

    Numeric keyboard Keyboard Style Click on to change the English keyboard to numeric keyboard. Special Characters Capital List of keyboard styles English keyboard (default) Numeric keyboard Special characters © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 15 Click on on upper right corner to browse through the special characters. Click on the special character of your choice. Special characters © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 16: Setup Wizard

    3. Enter the new password again in the Confirm text field and then click Next. Note: After the new password is setup, the NVR will install the TV-IP320PI automatically in the background. When the camera installation is done, live video will be displayed. © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 17 TRENDnet User’s Guide TV-NVR104K 4. Click the selection list to the right of Time Zone. 5. Select your time zone. 5. Time Zone 6. Date Format 7. Date 8. Time © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 18 7. Click the selection list to the right of System Date.  Select the year by clicking on left or right arrow.  Select the month by clicking on left or right arrow.  Select the day by clicking on the date. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 19: Start Recording

    Video playback on page 79 for more details.) Click Yes to start continuous recording. (For more advanced video recording features, please see Scheduled recording on page 70 for more details.) © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 20: System Management (Local)

    Screen mode, click on Multi-Screen and then choose 2 x 2 to switch to multi-screen live view mode. Previous Screen: In Single Screen mode, you can manually switch the video to the previous channel. © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 21 Playback: Click Playback to go full playback menu. For more information, please reference the please see the Video playback on page 79 for more details. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 22: Shortcut Menu

    Adjust the distance of each step of moving by sliding the Speed. Each step can have farther distance when sliding the Speed toward the right, and vice versa. Right-Up Right Down Right Down Left-Up Left Left Down Speed © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 23 PTZ menu back. Center operation. Point and click on the video. The camera will move the camera and make the pointed spot the center of the video. Menu. Bring up the advanced PTZ menu. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 24: Digital Zoom

    Drag and drop or double click to define the area you want to zoom in. The defined area is showed in red rectangular. Right click to exit the zoom mode. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 25: Image Settings

    The greater number means the color will be more saturated. Default: 128 Use the slider or enter a number (0-255) to adjust the image HUE setting. Default: 128 Close Click on to close the shortcut menu. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 26: Using The Main Menu

    The NVR will ask you to enter the password every time you want to login to the management page. Enter the password and then click on OK to bring up the main menu. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 27: Restore Default Password

    USA/Canada phone support: Toll Free English: (855) 373-4741 • Monday – Friday: 7:00 AM – 5:30 PM, PST After hours 24/7: (866) 845-3673 Global Support: Find the support number for your country at: www.trendnet.com/contact © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 28: Logout, Start Up, Or Shut Down The Nvr

    When you have done the NVR settings and managements, you’ll want to lock your NVR before you leave. Click Logout to exit the NVR management. Note: You can also set automatic time out. The default setting is 5 minutes without management interaction. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 29: Camera Settings Menu

    Camera installations camera model name. You can set it up on your The TV-NVR104K comes with two TV-IP320PI. Other compatible cameras camera directly or set it up in NVR for compatible are listed on compatible camera list. There are three major groups of cameras.

  • Page 30: Copyright 2015 Trendnet. All Rights Reserved

    Please see the compatible camera list for more detail. PoE Password If you install plug-and-play TRENDnet 1 with its Set: factory default setting, the TV-NVR104 will set the camera away from the default and load the TV- NVR104 password as camera access password.

  • Page 31: Copyright 2015 Trendnet. All Rights Reserved

    PoE ports. One for each port. The NVR will detect the camera and install it automatically. TV-IP320PI and TRENDnet 3 cameras are all plug-and-play cameras to TV-NVR104. If you changed the channel settings before, click the Edit icon and then select Plug-and-Play on Adding Method and then click OK to save the settings.

  • Page 32: Copyright 2015 Trendnet. All Rights Reserved

    4. Management port. (See compatible camera list for more details) 7. Enter camera access password. 5. Choose the camera video channel number or leave it with default 8. Click OK to save the settings. channel 1. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 33: On Screen Display Settings

    HUE: Use the slider or enter a number (0-255) to adjust the image HUE setting. Default: 128 Move the yellow or red box to position the text. Click Apply to apply the change. © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 34 TRENDnet User’s Guide TV-NVR104K Mirror: Choose horizontal, vertical or both to adapt to the physical installation. Click Apply to apply the settings. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 35: Ptz Settings

    Click on + or – to adjust zoom, focus and aperture (iris). Click button, the camera will turning around continuously. Click the button again to stop policing. Camera: Click to choose the camera you want to change the settings. Zoom Policing Focus Aperture (Iris) © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 36: Preset Positions

    . The preset selection screen will pop up. Click  Click to stop recording. up/down arrow to select the preset number you want. To recall a preset: 1. Select Call Preset. 2. Click the number of preset. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 37: Patrol

    1. Click to add a key point. Select the preset number, duration you want to stay on this key point and the speed you want to go this key point and then click OK. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 38: Motion Detection

    Draw Area: Click and drag on the area you want to set up the motion detection or click Full Screen for the whole image area. The red grids represent the motion detection area. Click Clear to clear the motion detection areas. © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 39 1. Select day of the week you want to edit on the row of Week. 2. Enter the period of time you want to actively detect the motion events. © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 40 Full Screen Switch the video on the VGA/HDMI monitor to Monitoring: the camera detected motion event. Audible Warning: Activate the audible on board buzzer. Send Email: Send email to notify the system manager. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 41: Privacy Mask

    Draw Area: Click and drag on the area you want to set up the privacy mask. Clear All: Click this button to clear all the masking area. Clear Zone 1 to 4: Click this button to clear specific masking area. Click Apply to apply the changes © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 42: Video Tamper

    Clear: Click this button to clear the video tamper area. events. Sensitivity: Move the slider to adjust detection sensitivity. Sliding to the right means the motion event is easier to be triggered. Click Apply to apply the changes © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 43 Full Screen Switch the video on the VGA/HDMI Monitoring: monitor to the camera detected motion event. Audible Warning: Activate the audible on board buzzer. Send Email: Send email to notify the system manager. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 44: Video Loss

    1. Select day of the week you want to edit on the row of Week. Camera: Click to choose the camera you want to change the settings. Click Apply to apply the changes 2. Enter the period of time you want to actively detect the motion events. © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 45 Full Screen Switch the video on the VGA/HDMI Monitoring: monitor to the camera detected motion event. Audible Warning: Activate the audible on board buzzer. Send Email: Send email to notify the system manager. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 46: System Configuration Menu

    You need to login for system management. Password: Enable password will ask entering password when login. Uncheck this box will set the management free to anyone physically access the NVR. Default: Enabled. Click Apply to apply the changes. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 47: Dst Settings

    Click Apply to apply the changes. dates. Time Zone: Click the selection list to the right of Time Zone. DST Bias: Choose the amount of time shifting for daylight saving adjustment. Click Apply to apply the changes. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 48: Network

    Enable DHCP: Check this box if the IP address is assigned by DHCP server. IPv4 Address: The IPv4 dynamic or static address IPv4 Subnet Network range of the subnet Mask: IPv4 Default The default route going further from TV-IP320PI Gateway: IPv4 subnet © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 49: Ddns

    User Name: Enter the account name. NTP Port: The server port number. Default: 123. Password: Enter the password. Confirm: Enter the password again. Click Apply to apply the changes. Click Apply to apply the changes. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 50: Email

    Sender: Enter the name to be appeared as the email sender. Sender’s Enter sender’s email address. Address: Select Select the pull down menu to select the receiver Receiver: you want to set up the detail. You can send to 3 © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 51: Upnp

    Click Apply to apply the changes. External Port: Choose the port number for mapping. Mapping IP 0.0.0.0 is the TV-NVR104 self-address. Address: Port: Local port number. Status: UPnP Status. Click Apply to apply the changes. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 52: Live View

    Enable Audio Enable or disable audio output on the NVR. Output: Default: disabled Event Output: Define where the video is going out when event triggered. The TV-NVR104 is set to both VGA and HDMI. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 53: View

    NO LINK: If you assign a channel to a display cell and there's no video stream, the cell is showing © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 54: Exceptions

    75 for more detail.) HDD Error: When the hard drive reading or writing error, the NVR can make audible sound or send email to system manager for the error. You can use the © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 55: User Accounts

    Edit Click Edit on user to change the account settings. Permission Click Permission on user to change the account permission settings. Click Add button to add an account © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 56 Select IP Remote Advanced Camera for all channels. Setting NVR advanced features with web Operation: login. Web Shutdown / Access the shutdown menu with web login. Reboot: Click Apply to apply the changes. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 57: System Maintenance Menu

    You can change this name in System configuration > More settings on page 47. Model: The model name of the TV-NVR104. Serial Number: The unique identification number of this device. Firmware Firmware version Version: Encoding Encoding version Version: © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 58: Recording Information

    IPv6 Address 2: IPv6 static address including the subnet prefix expression in the end of the string. IPv6 Default The default route going further from IPv6 subnet Gateway: Enable DHCP: The IP address is assigned by DHCP server or not. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 59: Hard Disk Storage Information

    Free space: Displays how much space is available free for video recordings. Property: R/W: Allow read and write. Type: Local: The hard drive is installed on the NVR. Group: The HDD on NVR is assigned to the group 1. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 60: Log Information

    IP Camera Alarm. Exception: video loss, illegal login, HDD full, HDD error, IP conflict, network disconnect, recording exception, IP camera © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 61: Log Export

    Select the USB drive on the Device Name and then click Refresh if you want to change the drive. Click New Folder to create a new folder on current directory. Click Format to format this USB storage. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 62: Save And Load Nvr System Settings

    Select the USB drive on the Device Name and then click Refresh if you want to change the drive. Click New Folder to create a new folder on current directory. Click Format to format this USB storage. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 63: Firmware Upgrade

    To find out if there is a firmware upgrade available for your Navigate to the remote upgrade (FTP) page. Enter the FTP server address, device, please check your TRENDnet model and version using the link. and then click on Upgrade.

  • Page 64: Factory Default

    TRENDnet User’s Guide TV-NVR104K Factory Default To reset your TV-NVR104 to the factory default, navigate to this Default page and then click on OK to reset all TV-NVR104 settings back to factory default. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 65: Network Tools

    Link Status: The network linking status. Type: Type of network, Ethernet. MAC Address: Media Access Address of the network interface. MTU: Maximum Transmission Unit in bytes. NIC Type: Type of the network card. Speed and duplexing. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 66: Network Statistics

    Statistics page. Click Refresh to update the information. Plug-in your USB network drive and then click Export to export the packet capture files. Click Refresh to list the directory on your USB storage again. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 67: Hard Drive Maintenance

    Self-test Status: Showing the self-testing status. Self-test Type: Choose a type of S.M.A.R.T. test: short, expanded, and conveyance tests. S.M.A.R.T.: Click to start S.M.A.R.T. test. Temperature: The temperature of the hard drive in Celsius. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 68: Bad Sector Detection

    Block Capacity: The block capacity. Status: The status of bad sector detection. Error count: The total error count detected. Error Info. Detailed sector damage or shield information. Pause: Pause the bad sector detection once it start running. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 69: Hard Drive Management

    HDD Capacity: The storage capacity of the hard drive. Max. Record Allocate the recording space to selected video Capacity: channel in gigabytes. Click Copy to copy the same quota setting to other channel. Click Apply to apply the changes. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 70: Scheduled Recording

    If you want to clear out some scheduled recording weekly schedule. Click Edit to bring up the detailed schedule setting table time, choose None. or click Copy to copy the same schedule to other channel. © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 71 Schedule: Select the day of the week All Day: Select if you want to setup the all-day recording. Start/End Time: Specify the starting and end of recording time in 24-hour format. Type: Select Continuous or Motion Detection recording © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 72 (1: Monday, 2: Tuesday, 3: Wednesday, 4: Thursday, 5: Friday, 6: Saturday and 7: Sunday). Click All to select the whole week. Click OK after you select the day of the week you want to copy to. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 73: Video Settings

    Expired Time: Lock the recording video for some period of time Main Stream (Record) Settings (in days) to prevent accidentally been overwrite Camera: Select the camera you want to change the or delete. recording video quality. Record Audio: Recording audio or not. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 74: Sub Stream

    Video Quality: Select the video compression algorithm. Frame rate: Select the frame rate to decide how many pictures you want to take in each second. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 75: Advanced Recording Setting

    NVR will overwrite old recordings when the disk is full. Otherwise the NVR will send Disk Full Notification to let administrator knows that the disk is full and cannot proceed any recording. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 76: Holiday Scheduling

    It does not repeat periodically. Week mode: Select the start and end dates of the week to specify the period of holidays. This setting is repeating every year. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 77: Backup Video Recordings

    Export Select the video channel and range of time and then click on Search to search the video you want to export. Click Quick Export if you want to export all video recordings. © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 78 Select the USB drive on the Device Name and then click Refresh if you want to change the drive. Click New Folder to create a new folder on current directory. Click Format to format this USB storage. Click to preview the video clip. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 79: Video Playback

    TV-NVR104K Video playback Bring up the main menu then click on Export Menu icon. Playback screen Channel Selection Type of Playback Live View Recording search Action Playback Time Line Scale Buttons Buttons Buttons © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 80: Search For Video Recordings

    Click this button to jump to the previous day. * Note: There are 5 steps of playback speed you can choose from: 1/4, 1/2, 1, 2, and 4 times of original speed. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 81: Playback Operations

    Click this button to add a tag with default tag name. Click this button to add a tag with customized tag name. Click this button to manage the tags Click this button to zoom in the live view. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 82: Playback Modes

    To search video with motion detection event, click and select the Event playback mode. Select the channel you want to search the motion detection. Enter the start and stop time. And, then click on Search. © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 83 If you want to search for specific tag name, enter the tag name or single section of recording leave it blank for all tags. And, then click on Search. to decide the length of playback before and after the motion event. © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 84 External File playback mode. Select the USB device to browse the files. Click Refresh to update the list when necessary. Click to view the video and use the playback control to control the playback. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 85: Access Your Nvr With The Web Browser

    Enter. 2. Enter the user name, admin, and the password you setup through the basic setup. If you didn’t setup your password, the change password © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 86 Click More Info and then Run anyway to install the plug- in. 3. The NVR management page will detect if you installed the camera video streaming plug-in or not. Click the link to download the plug-in from TV-NVR104. © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 87 8 and 16 characters. (Alphanumeric: a-z, A-Z, 0-9, !, @, #, $). 10. Enter the user name admin and new password again to start secured 7. Click Finish to finish the installation. session. 8. Open the browser and login again. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 88: Logging-In To The Camera For The First Time (Os X)

    Note: If you were not go through the basic setup, the camera plug-and-play process will begin after you setup the password. Wait a few minutes and press F5 to refresh the browser for the live video. © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 89 5. Go to the Finder and navigate to the Download folder. Command- Click the WebComponents.pkg and then click Open. (If you are install the plug-in from the CD, just browse to /Mac folder and double click the WebComponents.pkg file.) © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 90 TV-NVR104K 6. Click Open to start installation. 8. Select a destination to install the plug-in. Then click Continue. 7. Click Continue to install the plug-in. 9. Use the default location and click Install. © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 91 12. Click Close to exit the installation. 11. Installation will process automatically. 13. Open the browser and login again with the default IP 192.168.10.30 or the IP that was dynamically assigned by your router. © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 92 A-Z, 0-9, !, @, #, $). 17. Enter the user name admin and new password again to start secured session. 15. Click Trust (You’ll have to do this again when your camera changes to a new IP address.) © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 93 Note: If you were not go through the basic setup, the camera plug-and-play process will begin after you setup the password. Wait a few minutes and press command- R to refresh the browser for the live video. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 94: Live View

    Live View After you log-in into the camera management page, you’ll see the Live View page. Start/Stop Streaming Video Stream Display Mode Start/Stop All Streams Snapshot Start/Stop Recording Zoom Microphone Speaker PTZ Control © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 95 Where can I find saved files? Videos and snapshots captured from Live View will be saved to your computer. See Live View Settings on page 104 for more details. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 96: Playback

    Click the date selection, and then choose a date as the date range of searching. Click Search to start searching. to confirm selection and then click X and then click to close this dialog box. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 97: Play Video

    Click this button to enable or disable the audio playback. Click this button for full screen playback. * Note: There are 5 steps of playback speed you can choose from: 1/4, 1/2, 1, 2, and 4 times of original speed. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 98: Download Recorded Videos

    Videos and snapshots captured from Playback will be saved to your computer. See Live View Settings on page 104 for details. Click button to download files. Check the time of the recording, select the videos you want to download, and then click Download. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 99: Log

    Click Save Log to save the logs to your computer. Where can I find saved files? Videos and snapshots captured from Playback will be saved to your computer. See Live View Settings on page 104 for details. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 100: System Information

    Firmware version Version: MAC Address: The MAC address of Ethernet Interface System Time: The system time setup in the camera. Keeping this time correct is important for recording, scheduled control and logging accurately. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 101: System Configuration

    But, the administrator’s name is fixed, you cannot change that. Enter the customized device name and the click on Save to save the settings. Click OK to save the changes. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 102: Time Settings

    Specify a time server (NTP server) to synchronize with. Server: (e.g. pool.ntp.org) Interval: The time interval that the TV-NVR104 will synchronize the time with NTP server. Default: 1440 minutes (24 hours) Click Save to save the changes © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 103: Daylight Savings

    Start Time: Enter the date that daylight savings starts End Time: Enter the date that daylight savings ends DST Bias Enter how much time the daylight saving adjusted by daylight savings. Click Save to save the changes © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 104: Live View Settings

    Medium size can have choose a new destination if you want to save the file moderate video stream smoothness and time delay. somewhere else. Click Save to save the changes © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 105: Maintenance

    TRENDnet model and version. To find out if there is a firmware upgrade available for your device, please check your TRENDnet model and version using the link. http://www.trendnet.com/downloads/ 1. If a firmware upgrade is available, download the firmware to your Reboot computer.

  • Page 106: Network Settings

    Subnet Mask: Network range of the subnet Default The default route going further from TV-IP320PI Gateway: IPv4 subnet IPv6 IPv6 Address: IPv6 self-assigned address of TV-NVR104 IPv6 Default The default route going further from TV-NVR104 Gateway: IPv6 subnet © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 107: Port

    The default User Name: Enter the account name. port number is 554. Password: Enter the password. Click Save to save the changes Confirm: Enter the password again. Click Save to save the changes © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 108: Video Settings

    Video Choose the video encoding type. H.264 is more Encoding: advanced selection while MJPEG videos is compatible to more applications such as embedded web video. Resolution: Resolution of the video stream. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 109: On Screen Display Settings

    Display Week: Check this box to display time of the week. Time Format: Select 12 or 24-hour time format. Date Format: Select the date format Display Mode: Choose how the text will show on the screen. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 110: Privacy Mask

    Record Audio: Record audio when the camera has audio areas. capability. Click Save to save the changes Expire Time: Specify how many days you want to lock the recording. Click Save to save the changes © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 111: Holiday Settings

    5. Click another day of the week by clicking on its tab to set the next schedule. Click OK when you have finished your settings. © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 112 This setting is repeating every year. Start Date: Select the day when the holiday starts. End Date: Select the day when the holiday ends. Click OK to save the changes © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 113: Events

    The red grids represent the motion detection area. Sensitivity: Move the slider to adjust detection sensitivity. Clear All: Click this button to clear all the set up areas. © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 114 6. Click Select All or the weekday you want to have the same schedule on different day. 7. Click another day of the week by clicking on its tab to set the next schedule. Click OK when you have finished your settings. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 115: Video Tampering

    The gray block represents Note: This feature is camera dependent. the detection area. Sensitivity: Move the slider to adjust detection sensitivity. Clear All: Click this button to clear all the set up areas. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 116: Exception

    Send Email: Check this box to send an e-mail notification Warning: Send Email: Send email to notify the system manager. when motion is detected. Click Save to save the changes Click Save to save the changes © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 117: Email

    SMTP Server: Simple Mail Transportation Protocol Server address, the outgoing email server address. It may be has address as your incoming email server, maybe not. Please ask your email service provider for detail. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 118: Storage

    Capacity: The total capacity of the hard disk can be used for video recording and log. Free Space: The free space left for video recording and log. Status: The disk status. Property: This network storage is read only or can be read and write. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 119: Appendix

    Click Save changes to save the changes. If you still have video on TV-NVR104 which located on 192.168.10.60. difficulty to find your camera with network discovery, check it out if it has to network discovery setting on other network profiles. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 120: Install Your Nvr System On Your Network

    IP address for remote access or advanced port forwarding settings on your router. Please make the assigned IP reserved, so your router will not accidentally assign the same address to other of your network devices. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 121: Compatible Camera List

    TRENDnet User’s Guide TV-NVR104K Compatible Camera List Most of TRENDnet and ONVIF cameras are compatible with TV-NVR104. For the best performance and interoperability, the following camera models are suggested: Model Protocol Description Default Basic Adv. Audio Port TV-IP310PI TRENDnet3 8000...

  • Page 122: Regulations

    This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. © Copyright 2015 TRENDnet. All Rights Reserved.

  • Page 123: Europe - Eu Declaration Of Conformity

    TRENDnet tímto prohlašuje, že tento TEW-735AP je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 2004/108/ES, 2006/95/ES a 2009/125/ES. TRENDnet hereby declare that the product is in compliance with the Dansk [Danish] Undertegnede TRENDnet erklærer herved, at følgende udstyr essential requirements and other relevant provisions under our sole TEW-735AP overholder de væsentlige krav og øvrige relevante...

  • Page 124: Rohs

    TRENDnet declara que este TEW-735AP está conforme com os [Portuguese] requisitos essenciais e outras disposições da Directiva2004/108/CE, 2006/95/CE e 2009/125/CE. Slovensko TRENDnet izjavlja, da je ta TEW-735AP v skladu z bistvenimi [Slovenian] zahtevami in ostalimi relevantnimi določili direktive2004/108/ES, 2006/95/ES in 2009/125/ES. Slovensky TRENDnettýmtovyhlasuje, že TEW-735AP...

  • Page 125: Limited Warranty

    Go to http://www.trendnet.com/gpl or http://www.trendnet.com Download appropriately for safe shipment. Customers shipping from outside of the USA and section and look for the desired TRENDnet product to access to the GPL Code or Canada are responsible for return shipping fees. Customers shipping from outside LGPL Code.

Table of Contents