Table of Contents
Advertisement
TRENDnet User's Guide
Access your NVR with the Web Browser
Default Settings and Factory Reset
To manage your TV-NVR104 through the web browser, you have to setup
the network connection first. If you didn't set up your NVR attaching to
your home/business network, please enable NVR's DHCP client (see page
48 for details). Click Apply and then restart the NVR. If you have already
installed your cameras, you have to manually change their settings. (You
don't have to do anything for plug-and-Play models connected directly on
PoE ports.) Check the network status (see page 58 Network Information)
when necessary to make sure the NVR gets the IP address from your
network.
Here's the list of your NVR's factory default settings:
System Default
Management IP: 192.168.10.60.
Administrator name: admin
Administrator password: admin
Note: If you are not having a brand new TV-NVR104, you may not know what
password was setup on the NVR. In this case, you have to call our 24-hour tech
support to get temporary access code to reset the NVR. See page 27 for more details.
© Copyright 2015 TRENDnet. All Rights Reserved.
System Requirement
To access you NVR with the browser, you need a Windows or OS X based
computer and up-to-date browser (Internet Explorer, Safari, Chrome, or
Firefox). A web browser plug-in must be installed to supported computer
and browser to watch the video.
You need to setup the IP address in the same network of TV-NVR104.
(192.168.10.x network or your home network). For example, setup your
computer with 192.168.10.2 static IP address.
For Windows system, please go to the next paragraph.
For OS X system, please go directly to page 88.
Logging-in to the NVR for the First Time (Windows)
1. Connect your computer to you home network and look for the
NVR by browsing your Network in File Explorer and then double
click the icon to visit the NVR. (If your computer does not
configured to find sharing resources, you can reference "Turn on
2. Enter the user name, admin, and the password you setup through the
basic setup. If you didn't setup your password, the change password
TV-NVR104K
network
discovery
on
Windows" on page 119.) Or,
you can find the TV-NVR104 IP
address assigned by your home
gateway by visiting home
gateway's web management
page, and then press Enter.
85
Advertisement
Table of Contents
