Table of Contents
Advertisement
TRENDnet User's Guide
TV-NVR104 Front View
Power
Storage
Network
Power: Solid: The power is on.
Off: The power is off.
Storage: Blink: The system is reading or writing the built-in
storage.
Off: The system is not accessing the storage.
Network: The LEDs on network port are always off
© Copyright 2015 TRENDnet. All Rights Reserved.
TV-NVR104 Back Panel
Audio
Power
VGA
Power: Power socket of camera (48V DC, 1.04A)
Note: Use only the adapter that came with your camera
Audio In: RCA connector to active microphone (1.0Vp-p, 1kΩ)
Audio Out: RCA connector to speaker (1.0Vp-p, 1kΩ)
VGA: Connect to VGA monitor with resolution higher than
1024 x 768
HDMI: Connect to HDMI monitor or HDTV
USB: Connect to optical mouse and/or external USB flash
drive for file import and export.
Network: Connect to your office or home network for remote
access and viewing
PoE: Connect 802.3af (15.4W Max.) cameras.
Grounding
Connect to grounding wire. This is especially
Point:
important when you install your camera outdoor.
TV-NVR104K
Network
Port
HDMI
USB
PoE
Grounding
Point
10
Advertisement
Table of Contents
