Recording Information; Network Information - TRENDnet TV-NVR104K User Manual

4-channel hd poe kit
Hide thumbs Also See for TV-NVR104K:
Table of Contents

Advertisement

TRENDnet User's Guide

Recording Information

NVR Recording Status Information
Camera No.: The channel number camera assigned into.
Recording
Showing the status and setup of the video
Status:
recording.
Frame Rate: Showing the camera recording frame rate.
Bitrate: Showing the camera recording video stream
bitrate in thousands bits per second.
Resolution: Showing the camera recording video resolution.
Record Type: Showing the type of recording.
Encoding
Showing the encoding parameters.
Parameters:
© Copyright 2015 TRENDnet. All Rights Reserved.

Network Information

NVR Network Interface Information
NIC: Network Interface Card. LAN1 is the assigned
network interface which represent to the non-PoE
network port.
IPv4 Address: The IPv4 address on this interface
IPv4 Subnet
Network range of the subnet
Mask:
IPv4 Default
The default route going further from TV-IP320PI
Gateway:
IPv4 subnet
IPv6 Address 1: IPv6 self-assigned address including the subnet
prefix expression in the end of the string.
IPv6 Address 2: IPv6 static address including the subnet prefix
expression in the end of the string.
IPv6 Default
The default route going further from IPv6 subnet
Gateway:
Enable DHCP: The IP address is assigned by DHCP server or not.
TV-NVR104K
58

Advertisement

Table of Contents
loading

Table of Contents