TRENDnet User's Guide
Plug-and-Play installation
This is an effort free installation. Just to make sure all your cameras are
set to factory default and connect the plug-and-play cameras to the PoE
ports. One for each port. The NVR will detect the camera and install it
automatically. TV-IP320PI and TRENDnet 3 cameras are all plug-and-play
cameras to TV-NVR104.
If you changed the channel settings before, click the Edit icon and then
select Plug-and-Play on Adding Method and then click OK to save the
settings.
© Copyright 2015 TRENDnet. All Rights Reserved.
Manual installation
1. Click the Edit icon and then select Manual on Adding Method.
2. Enter the camera IP address.
TV-NVR104K
31