Table of Contents
Advertisement
TRENDnet User's Guide
Hardware installation
TV-NVR104K comes with everything you need to set up a basic network
surveillance system. Just connect to a monitor or HDTV (not included in
this package), you can do the live view and settings on the NVR.
It is recommended to setup the system on your table before physically
wiring and mounting the cameras.
Wiring for System Setup
Connect NVR to your network (optional)
If you want to remote access the NVR and want to install the TV-NVR104
on your home network, you can connect the NVR to the network in the
first beginning, by connecting one end of your network cable to your home
router or network switch, and then connect the other end of the cable to
the network port on TV-NVR104.
The TV-NVR104 install cameras automatically after power up. If you
decide the let the NVR gets its IP dynamically or setup the IP address to
your network, please setup your NVR without camera connected. After
the IP set up, power off the NVR and then going through the installation
again.
Connect to the cameras
Using the included network cables connect the TV-IP320PI camera's PoE
network port to any of the PoE network ports on the NVR. The TV-
NVR104 powers up the PoE cameras over the network cable. (So, the
optional power connection on the cameras are not using in this
installation.)
© Copyright 2015 TRENDnet. All Rights Reserved.
Connecting the power supply
1.
Connect the 48V DC power adapter to the TV-NVR104 power port.
2.
Connect the power cables to the power adapters.
3.
Plug the power cables into a power source.
4.
Connect the grounding point to a ground wire.
Connect to the monitor or TV
Connect a monitor to either the HDMI or VGA port.
Connect the mouse
Connect the included mouse to one of the USB ports.
NVR Installation
Setup a safe and secured place for your NVR. Place it in a locked or not
easy accessed place can add more factors in the security. Connecting to a
UPS (Uninterruptible Power Supply) is recommended.
Provide a good ventilation and away from clusters and damp
environment is also important to the location of your NVR device. Make
the NVR installation accessible for annual maintenance to clean up the fan
or replace the hard drive is a decent consideration for maintenance.
TV-NVR104K
12
Advertisement
Table of Contents
