Video Settings - TRENDnet TV-NVR104K User Manual

4-channel hd poe kit
Hide thumbs Also See for TV-NVR104K:
Table of Contents

Advertisement

TRENDnet User's Guide

Video Settings

Set up the video quality for recording (main stream), the higher video
quality require larger storage space and better network condition. Please
choose the best profile of your choice.
Note: Settings in this section are not available all cameras. The NVR will prompt the
message to remind you the setting is not available on selected camera.
Main Stream (Record) Settings
Camera: Select the camera you want to change the
recording video quality.
© Copyright 2015 TRENDnet. All Rights Reserved.
Encoding
The type of video from the camera.
Parameters:
Stream Type: Select you want to stream video only or video
and audio.
Resolution: Select the video resolution.
Bitrate type: The bitrate is the rate of information generated
from the video. The higher bitrate means more
data and more traffic and better video quality.
Constant bitrate generates same amount of
information over the same period of time.
Variable bite rate takes one step further to
compress the information whenever it can,
therefore, generates the same or lower amount
of information compare to the constant bitrate.
Video Quality: Select the video compression algorithm.
Frame rate: Select the frame rate to decide how many
pictures you want to take in each second.
Max. Bitrate
Select General to set the maximum bitrate in
Mode:
certain brackets. Choose Customized to set the
maximum bitrate on your own.
Max. Bitrate: The maximum information allowed to record on
the NVR in thousands of bits per second.
Max. Bitrate
Recommended bitrate setting.
Range
Recommended:
Pre-Record: If the recording is triggered by the motion event,
this value specifies to start recording some
period of time before the motion event
happened.
Post-Record: If the recording is triggered by the motion event,
this value specifies to record video some period
of time after the motion event happened.
Expired Time: Lock the recording video for some period of time
(in days) to prevent accidentally been overwrite
or delete.
Record Audio: Recording audio or not.
TV-NVR104K
73

Advertisement

Table of Contents
loading

Table of Contents