Table of Contents
Advertisement
TRENDnet User's Guide
Appendix
Turn on network discovery on Windows
The TV-NVR104 is UPnP enabled device. Find your camera is easy with
Windows network discovery. If your network discovery is turned off, go
to Control Panel >> Network and Internet >> Network and Sharing
Center >> Advanced sharing settings and then select Turn on network
discovery. Click Save changes to save the changes. If you still have
difficulty to find your camera with network discovery, check it out if it has
to network discovery setting on other network profiles.
© Copyright 2015 TRENDnet. All Rights Reserved.
Direct video access - RTSP
To access the video directly through RTSP, just visit the camera IP address
on port 554 by default.
To access the video through NVR, you need to enter the IP address, port
number and leading path "/Streaming/Channels" then specify the channel
number. The channel number is 2 digits leading with zero. For example:
rtsp://192.168.10.60:554/Streaming/Channels/01 to view the channel 1
video on TV-NVR104 which located on 192.168.10.60.
TV-NVR104K
119
Advertisement
Table of Contents
