Table of Contents
Advertisement
TRENDnet User's Guide
Firmware Upgrade
Local Upgrade
TRENDnet may periodically release firmware upgrades that might add
features or fix problems associated with your TRENDnet model and
version. To find out if there is a firmware upgrade available for your
device, please check your TRENDnet model and version using the link.
http://www.trendnet.com/downloads/
1. If a firmware upgrade is available, download the firmware to your
computer.
2. Unzip the file to a folder on your computer.
3.
Read the firmware upgrade instruction for specific version
update information.
4. Log into the TV-NVR104K.
5. Getting to this Maintenance page to upgrade firmware.
Extract the firmware file from the downloaded zip file and then save it to
the USB drive. Plug in the USB drive to one of the available USB slot on the
NVR. Choose Upgrade page and then click on Upgrade.
© Copyright 2015 TRENDnet. All Rights Reserved.
Remote Upgrade
You can setup the upgrade over the network with FTP protocol. To
proceed FTP upgrade, you need to prepare a FTP server on the local
network with username: ftp and password: ftp. Place the firmware file on
the root directory when the ftp account is logging in the FTP server.
Navigate to the remote upgrade (FTP) page. Enter the FTP server address,
and then click on Upgrade.
TV-NVR104K
63
Advertisement
Table of Contents
