Table of Contents
Advertisement
TRENDnet User's Guide
Events
Motion Detection
Set up how the motion detection event will be triggered and what actions
will be triggered.
Note: This feature is camera dependent.
© Copyright 2015 TRENDnet. All Rights Reserved.
Channel: Select the video channel you want to edit.
Enable
Check this box to enable motion detection. Click
Motion
Save to save the choice.
Detection:
Draw
Click Draw Area button to start drawing. Click
Area:
and drag on the area you want to set up the motion
detection. The number of areas you can set up
depends on camera models. Click Stop Drawing
to stop drawing motion detection areas.
The red grids represent the motion detection area.
Sensitivity: Move the slider to adjust detection sensitivity.
Clear All: Click this button to clear all the set up areas.
TV-NVR104K
113
Advertisement
Table of Contents
