TRENDnet User's Guide
Video Tampering
Set up how the video tampering detection event will be triggered and
what actions will be triggered. When video is suddenly blocked or blacken,
tampered, the video tamper notifications will alert the system manager to
check the camera.
Note: This feature is camera dependent.
© Copyright 2015 TRENDnet. All Rights Reserved.
Channel: Select the video channel you want to edit.
Enable
Check this box to enable tamper detection. Click
Tamper
Save to save the settings.
Detection:
Draw Area: Click Draw Area button to start drawing. Click and
drag on the area you want to set up the tamper
detection. Click Stop Drawing to stop drawing
motion detection areas. The gray block represents
the detection area.
Sensitivity: Move the slider to adjust detection sensitivity.
Clear All: Click this button to clear all the set up areas.
TV-NVR104K
115