Table of Contents
Advertisement
TRENDnet User's Guide
Logout, start up, or shut down the NVR
The TV-NVR104 is a class A network equipment designed for 24/7
operation. Just plug-in the power source, the TV-NVR104 is up and
running. When you want to change the NVR settings, manage the cameras
proceed system maintenance or software upgrade, you need to log in, log
out, restart, or shut down your NVR gently.
Pulling out the power source may cause unexpected hard drive damage
and system malfunction which is not a suggested way to power down your
NVR.
Startup your NVR
Make sure the power supply is plugged into an electrical outlet. It is highly
recommended that an uninterruptible power supply (UPS) to be used in
conjunction with the unit.
Shutdown your NVR
Bring up the main menu. Click on Shutdown Menu
Shutdown sub menu is showing up.
© Copyright 2015 TRENDnet. All Rights Reserved.
Click Shutdown
the hard drive for shutting down. Then click the Yes to confirm that you
want to shut down the NVR.
Rebooting your NVR
Click Reboot
icon. The
Log out from NVR management
When you have done the NVR settings and managements, you'll want to
lock your NVR before you leave. Click Logout
management.
Note: You can also set automatic time out. The default setting is 5 minutes without
management interaction.
to gracefully end the recording sessions and prepare
to reboot your NVR without power down.
TV-NVR104K
to exit the NVR
28
Advertisement
Table of Contents
