Table of Contents
Advertisement
Configuration via PC
Subscriber configuration via PC
It is possible to configure subscriber's settings also via PC. In order to do so, you
need a PC with network access to the tiptel 3022 office resp. tiptel 3011 office, your
user name and your password.
For the configuration please start your Internet browser and enter the telephone
system's IP address or the network identifier in the address bar. Factory settings are
"192.168.1.100" or "tiptel.office".
The user name and password will be provided by your system administrator or the
person installing your telephone system.
The configuration in the delivery status (factory settings) is described hereafter.
Example: Subscriber "Analog50" wishes to modify his configuration.
The user name is pre-set "Analog50". No password is used.
After logging in the following web page is displayed:
18
Advertisement
Table of Contents
