Operating Your Radio - Dab - Roberts eco 4 Bt User Manual

Operating your radio - DAB

1. Carefully extend the telescopic aerial. The aerial should be fully
extended and positioned vertically for optimum reception.
2. Press and release the On/Off button to switch on your radio. The
display will show 'WELCOME' for a few seconds. After each use the
radio will remember the mode used and then switch on in that mode
the next time that it is used.
3. If this is the fi rst time the radio is used a scan of the Band III DAB
channels will be carried out. This is known as 'Auto tune'. If the radio
has been used before the last used station will be selected.
4. During Auto tune each group of stations will be detected and the station
count will be updated.
5. When the Auto tune is completed the fi rst station (in numeric-alpha
order 0...9...A....Z) will be selected. The fi rst station in the list of stations
found will be played.
6. If no stations are found then 'OFF AIR' will be displayed and it may be
necessary to relocate your radio to a position giving better reception.
You should then carry out an auto tune to fi nd stations as described
on page 9 (see Finding new stations on page 9).
7. Adjust the Volume, treble and bass controls to the required setting.
• Your radio has an indicator
of the DAB radio signal being received.
5
on the display to indicate the strength
2
7
7
7