Manual Tuning - Fm - Roberts eco 4 Bt User Manual

Manual tuning - FM

1. Carefully fully extend the telescopic aerial located on the rear of your
radio.
2. Press and release the On/Off button to switch on your radio.
3. Press and release the Mode button until the FM mode is selected.
4. Rotate the Tuning control or press and release the Tuning Up or
Down buttons to tune to a station. The frequency will change in steps
of 50kHz.
If the radio is tuned to a station of suffi cient signal strength with RDS
information present, then the display may change to show the station
name.
5. When the waveband end is reached the radio will recommence tuning
from the opposite waveband end.
6. Set the Volume, treble and bass to the desired setting.
7. To switch off your radio press and release the On/Off button.
If you fi nd that an FM broadcast has a lot of background hiss, this may
often be reduced by setting the radio into Mono reception mode for the
current FM station. Please refer to the section 'Stereo / Mono setting - FM'
on page 18 for further details.
15
2,7
Mode
3
4
4
4
6
6
6