Operating Your Radio - Dab - Roberts Blutune T2 Manual

Operating your radio - DAB

1. Press the On/Standby button to switch on your radio.
2. When first switched on, the radio will be in DAB mode. After each use the
radio will remember the mode used and then switch on in that mode the next
time it is used. If the radio has been used before, the last used station will
be selected.
3. If this is the first time the radio has been used a scan of the Band III DAB
channels will be carried out (depending on whether scanning was already
completed in standby mode). During the scanning process the display will
show the progress of the station search. The number on the display is the
number of stations that have been found.
4. When the scan is completed the first station (in numeric-alpha order
0...9...A....Z) will be selected. The first station in the list of stations found
during scanning will be highlighted. Rotate Tuning to step through the list
of available stations. Press Tuning to select and tune to the desired station.
The display will show the station name.
5. If no signals are found then it may be necessary to relocate your radio to a
position giving better reception. You should then carry out a scan to find new
stations as described on page 8.
• Your radio has an indicator
DAB radio signal being received.
Note: When first switched on, the radio will set the volume to a moderately high
level, in case the broadcast is very quiet. After you have set the volume, the radio
will remember the setting that you have applied for the next time that it is used.
7
on the display to indicate the strength of the
DAB
Scanning
Stations
Station list
BBC Radio 2
BBC Radio 3
BBC Radio 4
BBC Radio 5 Live
Tuning
BBC R5LiveSportX
BBC Radio1Xtra
Select / Info / Snooze
29