Operating Your Radio - Dab - Roberts Opus Manual

Operating your radio - DAB

1. Press the On/Off button to switch on your radio. The radio will beep
to confirm that it is now switched on.
2. When first switched on, the radio will be in DAB mode. After each use
the radio will remember the mode used and then switch on in that
mode the next time it is used. If the radio has been used before, the
last used station will be selected.
The radio should briefly display 'DAB radio'. If the radio displays 'FM
radio' or any other mode then press the Tuner button to select DAB
mode.
3. If this is the first time the radio has been used a scan of the Band III
DAB channels will be carried out (depending on whether scanning was
already completed in standby mode). During the scanning process
the display will show the progress of the station search. The number
on the display is the number of stations that have been found.
4. When the scan is completed the first station (in numeric-alpha order
0...9...A....Z) will be selected. The display will show the station name.
5. If no signals are found then it may be necessary to relocate your radio
to a position giving better reception. You should then carry out a scan
to find new stations as described
7
on page 8.
FM
DAB
On/Off
Tuner
10
Welcome
DAB radio
Scanning 28
Absolute Rad 90s
The Uk's only 90