Battery Operation; Mains Operation - Roberts eco 4 Bt User Manual

Battery operation

1. Remove the Battery cover on the rear of the unit by pushing the
battery door in and downwards.
2. Insert six LR20 (D size) batteries into the spaces in the compartment.
Take care to ensure all batteries are inserted with the correct polarity
as shown inside the battery compartment. Replace the battery cover.
3. Reduced power, distortion and a 'stuttering' sound are all signs that
the batteries may need replacing.
4. If the radio is not to be used for any extended period of time it is
recommended that the batteries are removed from the radio.
We would recommend for economy that the eco4 Bt is used via the
mains whenever possible with battery operation for occasional use
only.
IMPORTANT: The batteries should not be exposed to excessive heat
such as sunshine, fi re or the like. After use, disposable batteries should
if possible be taken to a suitable recycling centre. On no account
should batteries be disposed of by incineration.

Mains operation

1. Place your radio on a fl at surface.
2. Plug the mains lead into the Mains Input socket located on the rear
of your radio ensuring that the plug is pushed fully into the socket.
3. Plug the other end of the mains lead into the wall socket and switch
on the wall socket. The mains LED will light. Whenever the mains is
used the batteries are automatically disconnected.
IMPORTANT: The mains plug is used as the means of connecting the
radio to the mains supply. The mains socket used for the radio must remain
accessible during normal use. In order to disconnect the radio from the
mains completely, the mains plug should be removed from the mains
socket outlet completely.
1
4