Wlan Module - HP Compaq Pro 4300 Maintenance & Serice Manual

WLAN Module

The WLAN module is located on the bottom left of the system board. The module is secured with one
Phillips screw and has two connected antennas.
Figure 6-54
To remove the WLAN module:
1. Prepare the computer for disassembly (see
on page
2. Remove the center access panel (see
3. Remove the memory access panel (see
4. Remove the drive access panel (see
5. Remove the stand (see
6. Remove the optical drive (see
7. Remove the top panel (see
8. Remove the rear cover (see
9. Remove the heat sink cover (see
10. Remove the system board shield (see
WLAN module location
33).
Stand on page
Optical Drive on page
Top Panel on page
Rear Cover on page
Preparing to Disassemble the Computer
Hinge Cover Panel on page
Memory Access Panel on page
Drive Access Panel on page
61).
40).
58).
62).
Heat Sink Cover on page
System Board Shield on page
34).
36).
38).
52).
69).
WLAN Module 71