HP Compaq Pro 4300 Maintenance & Serice Manual page 48

All-in-one business pc
Hide thumbs Also See for Compaq Pro 4300:
Table of Contents

Advertisement

5.
Using your fingers, press the visible edge of the optical disc drive toward the side of the
computer to push the drive partially out of the computer. Grasp the front end of the drive and pull
the drive out of the computer.
Figure 6-11
Removing the optical disc drive
6.
If you need to remove the drive bracket from the drive, remove the two screws (1) that secure
the bracket to the drive, and then remove the bracket from the drive (2).
NOTE:
Optical drive spare part kits do not include replacement brackets.
Figure 6-12
Removing the optical drive bracket
To install an optical drive, reverse the removal procedures.
Optical Drive
41

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents