Memory Access Panel - HP Compaq Pro 4300 Maintenance & Serice Manual

Memory Access Panel

The memory access panel is located on the rear, right side of the computer (viewed from behind).
You must remove it to access the memory modules and RTC battery.
Figure 6-3
To remove the memory access panel:
1. Prepare the computer for disassembly (see
on page
2. Remove the center access panel (see
36 Chapter 6 Removal and Replacement Procedures All-in One (AIO) Chassis
Memory access panel location
33).
Preparing to Disassemble the Computer
Hinge Cover Panel on page 34).