Dinstar FXSFXO User Manual
  1. Manuals
  2. Brands
  3. Dinstar Manuals
  4. Gateway
  5. FXSFXO
  6. User manual

Dinstar FXSFXO User Manual

Dag series voice gateway
Hide thumbs
Table of Contents

Advertisement

Quick Links

DAG Series FXSFXO Voice Gateway
User Manual V2.0
Dinstar Technologies Co., Ltd.
Address: Floor 6 Guoxing Building Changxing Road Nanshan District Shenzhen China
518052
Telephone: 86-755-26456664
Fax:
86-755-26456659
Email:
sales@dinstar.com, support@dinstar.com
Website:
www.dinstar.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FXSFXO and is the answer not in the manual?

Questions and answers

Related Manuals for Dinstar FXSFXO

Summary of Contents for Dinstar FXSFXO

  • Page 1 DAG Series FXSFXO Voice Gateway User Manual V2.0 Dinstar Technologies Co., Ltd. Address: Floor 6 Guoxing Building Changxing Road Nanshan District Shenzhen China 518052 Telephone: 86-755-26456664 Fax: 86-755-26456659 Email: sales@dinstar.com, support@dinstar.com Website: www.dinstar.com...
  • Page 2 Revision Records File Name DAG Series FXS/FXO Voice Gateway User Manual Document Version Firmware Version 2.11.08.07 Date 2014/03/16 Revised by Technical Support Department...

  • Page 3: Table Of Contents

    Table of Contents Equipment Introduction ..................1 1.1 Overview ......................1 1.2 Equipment appearance ................1 1.3 Power supply ....................2 1.4 Network Applications ..................2 1.5 Functions and Features ................3 1.5.1 Protocol standard supported ............3 1.5.2 Voice and Fax parameters ..............3 1.5.3 Supplementary service ..............
  • Page 4 4.5 Network Configuration ................15 4.5.1 Local Network .................. 15 4.5.2 VLAN Parameter ................18 4.5.3 MAC Clone (Routing mode) ............20 4.5.4 DHCP Server (Routing mode) ............21 4.5.5 DMZ Host (Routing mode) ............. 21 4.5.6 Forward Rule (Routing mode) ............22 4.5.7 Static Route Table ................

  • Page 5: Equipment Introduction

    DAG1000/2000 Series FXS/FXO Voice Gateway User Manual 1. Equipment Introduction 1.1 Overview Thanks for purchasing Dinstar DAG ( ) series FXS/FXO Hereinafter referred to as the DAG hybrid analog voice gateway. DAG series FXS/FXO hybrid analog gateway is access gateway based on IP network. It can provide low cost, simple operation VoIP solutions for small enterprise, the family office, remote office and branch enterprise.

  • Page 6: Power Supply

    DAG2000-8S8O can be installed in the 19 inch frame, and adopts AC power supply. Notes: Because power adapter interface is different in different country, please confirm the interface standard with us before shipment. 1.4 Network Applications Figure 4-1：Network Applications Dinstar Technologies Co., Ltd.

  • Page 7: Functions And Features

    Voice interrupted detection • One stage dialing • Two stage dialing • PSTN exterior ports polling • Polarity Reversal • FAS（ Fake billing correction ） • DC/AC impedance config • Calls detection (Bellcore Type 1&2, ETSI,DTMF) • Dinstar Technologies Co., Ltd.

  • Page 8: Basic Operations

    IP addresses (with necessary port forwarding or DMZ). Operation Process： 1）Pick up the analog phone then dial “*47” 2）Enter the target IP address. 【Note】 ：No dial tone will be played between step 1 and step 2 Examples: Dinstar Technologies Co., Ltd.

  • Page 9: Call Hold

    3）Caller A will hear the confirm tone. Then, A can hang up. Note： Call features enable “ ” must be set to “Yes” in web configuration page. Caller A can place a call on hold and wait for one of three situations: Dinstar Technologies Co., Ltd.

  • Page 10: Attended Transfer

    DAG (FXS) support all traditional and senior phone function. Table 2.5-1 Feature Codec Feature Codec Operation Instructions *158# View the LAN port IP address *159# View the WAN port IP address *114# Inquire port account *150* Set the way of obtain IP address Dinstar Technologies Co., Ltd.
  • Page 11 Enable No Answer Call Forward *93# Disable No Answer Call Forward *78# Enable DND *79# Disable DND *200# Access Voice mail flash/hook will switch a Switch between incoming calls, If not in session, Flash/Hook new channel for new call. Dinstar Technologies Co., Ltd.

  • Page 12: Sending And Receiving Fax

    *158# to inquire LAN port IP address and dialing *159# to inquire WAN port IP address. 3.2 Factory Reset After picking up, dial *166*000000#, then onhook and restart after “Setting successful”. 3.3 Configure LAN Port’s IP Address Before configuration, please ensure:（1）The device is power on; （2）devices connecting Dinstar Technologies Co., Ltd.

  • Page 13: Web Configuration

    IP address. 4.1.1 Login Device LAN port default IP address is 192.168.11.1, WAN port default obtain IP address by DHCP. Advice to modify the IP address of the local computer equipment and ensure that Dinstar Technologies Co., Ltd.

  • Page 14: Login Web

    192.168.11.10 –t order to check the connectivity between them 4.1.2 Login WEB Open web browser, then input IP address of device, Press “Enter”, it pop up logging on identity authentication interface. Figure 4.1-1 DAG FXS Login Interface Dinstar Technologies Co., Ltd.

  • Page 15: Navigation Tree

    Default username and password: admin/admin, click “OK” to entry into web interface. Figure 4.1-2 DAG Configure Interface 4.2 Navigation Tree DAG series voice gateway web configuration interface mainly includes navigation tree and the right configuration interface. Choose navigation tree in order to entry into the configuration interface. Dinstar Technologies Co., Ltd.

  • Page 16: State And Statistics

    When device is in bridge mode, navigation tree won’t display "routing configuration" items and the following "DHCP service", "DMZ host", "forward rules" and "static routing" and "ARP" etc. 4.3 State and Statistics 4.3.1 System Information System information interface shows the run information as following figure 4.3.1 below: Dinstar Technologies Co., Ltd.
  • Page 17 The current NAT mapping/maximum number of concurrent mapping Network Connection number. Occupancy Ratio Network Traffic Statics Total bytes of message received and sent by network port. Version Includes: product mode, software version, hardware version and built time etc. Dinstar Technologies Co., Ltd.

  • Page 18: Registration Information

    4.3.4 RTP Session Statistics Figure 4.3-4 RTP Session Statistics Figure 4.3-4 display real-time RTP conversation flow data information, includes: Port, voice codec, packet period, local port, peer IP, peer port, sent packets, receive packets, lost packets, jitter and duration. Dinstar Technologies Co., Ltd.

  • Page 19: Quick Setup Wizard

    When it set to bridge mode, only need to configure WAN port IP address and DNS. If set to route mode, default LAN port IP will display and it can be change by users. Note: DAG2000-8S8O just supports bridge mode only. DAG1000-4s4o supports bridge and route mode. Configuration of Route mode: Dinstar Technologies Co., Ltd.
  • Page 20 DAG1000/2000 Series FXS/FXO Voice Gateway User Manual Figure 4.5-1Route Mode Configuration of Bridge mode Dinstar Technologies Co., Ltd.
  • Page 21 【Notes】 ： 1） If select automatically obtain IP address, please ensure DHCP server in network and work normally. 2） Under route mode, please configure LAN port and WAN port in different segment, otherwise DAG can’t work normally. Dinstar Technologies Co., Ltd.

  • Page 22: Vlan Parameter

    Lower priority level packets are not sent, if there is packets in queued in higher level queues. IEEE 802.1p describes no admission control protocols. It would be possible to give Network Control priority to all packets and the network would be easily congested. Dinstar Technologies Co., Ltd.
  • Page 23 802.1 protocol to control network traffic priority, Data 802.1p Priority（0-7） Priority from 0-7. Fill out an ID to describe a voice VLAN group, ID 0 Voice VALN Voice 802.1Q VLAN ID(0-4095) used to management VLAN, can’t used to service configure. Dinstar Technologies Co., Ltd.

  • Page 24: Mac Clone (Routing Mode)

    MAC address of bound computer to the ISP server and let the ISP server think that used only a single piece of computer, in fact many computers in sharing the Internet. This function used to prevent ISP limiting to share the Internet. 【Note】 ：Restart device to take configuration effect. Dinstar Technologies Co., Ltd.

  • Page 25: Dhcp Server (Routing Mode)

    Make the internal network located the back of the zone of confidence and not allow any access, separation of inside and outside the network, protect user information.DMZ can be understood that a special areas of the network and different from Dinstar Technologies Co., Ltd.

  • Page 26: Forward Rule (Routing Mode)

    Port (0-1024) and all the foreign communication agreement; while the forward rule offers a single or a few port foreign communication on some protocol. When the conflicts exist between forward rule and DMZ host,the configuration of forwarding rules is preferred. Forward rule configuration interface as follows: Dinstar Technologies Co., Ltd.

  • Page 27: Static Route Table

    When there are many segments in LAN network and need to complete some specific application among these segments, the static route need to be configured. Static Route configuration interface as follows: Figure 4.5-8 Static route configuration Interface Dinstar Technologies Co., Ltd.

  • Page 28: Arp

    Presence, Find-me, Music On Hold. 3）SIP server based on Linux platform, such as: OpenSER、sipXecx，VoS，Mera etc. 4） SIP server based on windows platform, such as :miniSipServer、 Brekeke， VoIPswitch etc. Dinstar Technologies Co., Ltd.
  • Page 29 1800s. Secondary SIP heartbeat Heartbeat message detect the connection status between device and SIP server. Use Random Port Random SIP service ports for DAG Set Local SIP port Default SIP service port is 5060. Dinstar Technologies Co., Ltd.

  • Page 30: Port Configuration

    User account information, provided by VoIP service provider (ITSP). Usually in SIPUser ID the form of digit similar to phone number or actually a phone number. Primary/Secondary SIP SIP service subscriber’s Authenticate ID used for authentication. Can be Dinstar Technologies Co., Ltd.

  • Page 31: Advanced

    FXO is a telephone. So just lead a inside to FXO port from company’s internal, or directly line a straight up in FXO from the telecom. FXO parameters include: Call progress Tone, Timeout for Dialing, Send Polarity Reversal Dinstar Technologies Co., Ltd.
  • Page 32 200 ms. Then switches don't think it's hang on, but keep the call, taking some other operating. The typical application of hook flash is the telephone switchboard. When need to transfer the call to other extension, then Dinstar Technologies Co., Ltd.
  • Page 33 Timeout for answer (Incoming call): This timer set how long the phone sets ringing when get incoming call. No RTP Detect: This option is to disconnect call when there is no RTP received. Default value is 90s Incoming call setting and Caller ID Dinstar Technologies Co., Ltd.
  • Page 34 CID/User ID: From:”Caller ID”<sip:201@host.com>;tag=51088abb From Mode when Caller ID Is Unavailable  Used to configure "From" Mode when Caller ID Is Unavailable Anonymous : From: <sip: Anonymous @host.com>;tag=51088abb Display/User ID: From: “Mike”<sip: 201 @host.com>;tag=51088abb Keep onhook until callee answered Dinstar Technologies Co., Ltd.
  • Page 35 To enable or disable Polarity Reversal. Delay Time after FXO Offhook Timer of the gateway to send SIP 200OK to VoIP. In case the fixed line doesn’t supply answer signal, the gateway will send answer signal to VoIP side. Dinstar Technologies Co., Ltd.

  • Page 36: Media Parameter

    To match with the impedance of phone line automatically or configure impedance manually. Here is the list that support on the gateway: 4.8.2 Media Parameter Media parameter mainly include: RTP start port, DTMF parameter, PreferedVocoder. Configuration Interface as follow： Dinstar Technologies Co., Ltd.
  • Page 37 Default is disable, if enable, according to the current noise environment dynamically adjust mute inhibit threshold,thus in the user in silent Slience Suppression state stop transmission background noise bag and save about VoIP bandwidth.In the low Dinstar Technologies Co., Ltd.

  • Page 38: Sip Parameter

    RTP Mode in SDP when Call Holding not receive and not send packet, then doesn’t play call waiting tone. Enable this function, users may use the * business call IP IP-to-IP Call address on the phone. Dinstar Technologies Co., Ltd.
  • Page 39 Voice mail instructions Here DAG work with Elastixas the example, introduces how voicemail work in DAG. 1） DAG register to Elastix server. Corresponding extension number enable voice mail function in Elastix and set password. As below： Dinstar Technologies Co., Ltd.
  • Page 40 Figure 4.8-5 Elastix Voicemail Setting Figure4.8-6 Voice Mail Setting In SIP Parameter 3） Enable voice mail in DAG and Elastix will ask you to leave a message after ringing 15 seconds, then Elastix will record and display your message. Dinstar Technologies Co., Ltd.

  • Page 41: Fax Parameter

    Figure 4.8-8 Fax Parameter Configure Interface Fax parameter description: Mode Fax mode support T.38, T.30(Pass-through),Modem, Adaptive. Tone Detection by Fax sound detection mode: Caller, Callee, Automatic. Fax error correction information Rate The rate of sending and receiving. Dinstar Technologies Co., Ltd.

  • Page 42: Digit Map

    Digit Map Syntax: 1. Supported objects Digit: A digit from "0" to "9". Timer: The symbol "T" matching a timer expiry. DTMF: A digit, a timer, or one of the symbols "A", "B", "C", "D", "#", or "*". Dinstar Technologies Co., Ltd.
  • Page 43 "411". We have a partial match with "xxxxxxx", but a complete match with "x11", and hence we send "411" to the Call Agent. 2. [2-8] xxxxxx | 13xxxxxxxxx Means that first is "2","3","4","5","6","7" or "8", followed by 6 digits; Dinstar Technologies Co., Ltd.

  • Page 44: Feature Codec

    4. [1-357-9]xx Means that first is "1","2","3" or "5" or "7","8","9", followed by 2 digits. 4.8.6 Feature Codec Feature codec includes device function and call function. Feature codec as follow: Figure 4.8-10 Feature Code Configuration Interface Dinstar Technologies Co., Ltd.
  • Page 45 *92*+ forward no reply number# Call Forward No Reply Deactivate *93#, close this function Do Not Disturb Activate *78#, enable DND function Do Not Disturb Deactivate *79#, close DND function Dial Voicemail *200#, visit voice mail box Dinstar Technologies Co., Ltd.

  • Page 46: System Parameter

    NAT for a local port. Two back of NAT router devices established UDP communication through this information. STUN doesn’t support TCP connection and H.323. 2）NTP：Network Time Protocol（NTP）is a computer time synchronization protocol. System parameter configuration interface as follow: Figure 4.8-11System Configuration Interface Dinstar Technologies Co., Ltd.

  • Page 47: Call & Routing

    Access Web by WAN Enable or disable accessing web by WAN Telnet Port Telnet service port, default is 23. 4.9 Call & Routing 4.9.1 Port Group Port group parameter include: Index, description etc. Port group configure interface as follow: Dinstar Technologies Co., Ltd.
  • Page 48 (ITSP). Usually in the form of digit similar to phone number or actually a phone number. SIP service subscriber’s Authenticate ID used for Primary/Secondary Authenticate ID authentication. Can be identical to or different from SIP User Dinstar Technologies Co., Ltd.

  • Page 49: Ip Trunk

    DAGs and also receiving incoming calls from other peer to peer gateway. IP trunk is help to DAGs establish peer-to-peer call between DAGs and other VoIP phones. IP trunk will be used in routing configuration. Dinstar Technologies Co., Ltd.

  • Page 50: Routing Configuration

    Heartbeat Default is disable, if enable, DAG will send “OPTION” to peer device 4.9.3 Routing Configuration Figure 4.9-3 Routing Parameter Configuration Interface This option determines the following routing of call take effect before or after manipulation. Dinstar Technologies Co., Ltd.

  • Page 51: Ip-Tel Routing

    Callee Prefix 008675526456659, the called prefix can be 0086755 or 00.,“any” means match any called number Calls to This call routing is routing to port or port group Dinstar Technologies Co., Ltd.

  • Page 52: Tel-Ip/Tel Routing

    Callee Prefix 008675526456659, the called prefix can be 0086755 or 00., “any” means match any called number Calls to This call routing is routing to port, port group, IP trunk and SIP server. Dinstar Technologies Co., Ltd.

  • Page 53: Manipulation Configuration

    This call routing is routing to port, port group Stripped Digits from Left Remove the called number digits from the left Stripped Digits from Right Remove the called number digits from the right Prefix to Add Add a number prefix Dinstar Technologies Co., Ltd.

  • Page 54: Tel-Ip Caller

    Add a number suffix Number of Digits to Leave from Starting from the right to retain the called number digits Right 4.10.2 Tel-IP Caller Figure 4．10-2 Tel-IP Caller Configuration parameters are the same with “IP->Tel Callee”. Dinstar Technologies Co., Ltd.

  • Page 55: Tel-Ip Callee

    Syslog agreement belongs to a kind of master slave agreement: Syslog sender will sent a small text information (less than 1024 bytes) to syslog the receiver. The receiver are: “syslogd”、 TCP/UDP. “syslog daemon” or syslog server. Syslog message can be transferred by Dinstar Technologies Co., Ltd.

  • Page 56: Firmware Upload

    2) Browse files and choose the loading program (Name the file extension. ldf) 3) Click “Upload”, the upload process will last about 60s and device can automatically restart after uploading.（The firmware update process don't shut off the power） Figure 4.11-2 Firmware upload Configuration Dinstar Technologies Co., Ltd.

  • Page 57: Data Backup

    Send test data packets to IP, check each other whether have response and statistical response time. It is ping. Used to test internet and analyzed network fault. Application format：Ping IP address. It is used to check the network connectivity or network connection speed command. Pinginstructions: 1) Click “ping test” Dinstar Technologies Co., Ltd.

  • Page 58: Tracert Test

    The next set have a hop limit value of 2, so that the second router will send the error reply. This continues until the destination host receives the packets and returns an ICMP Echo Reply message. Trace route uses the returned ICMP messages to produce a list of hops (which usually consists Dinstar Technologies Co., Ltd.

  • Page 59: Password Modification

    2) Fill IP address or domain connected, click start. Figure 4.11-6 Tracert Test Interface 4.11.7 Password Modification Includes WEB username and password, Telenet username and password modify. Note：Default web and telnet username and password is: admin, admin. Dinstar Technologies Co., Ltd.

  • Page 60: Factory Reset

    Click the “Save” button in the Configuration page to save the changes to the equipment configuration. The following screen confirms that the changes are saved. If the changes need restart, reboot or power cycle the equipment to make the changes take effect. Figure 4.11-9 Device Restart Dinstar Technologies Co., Ltd.

  • Page 61: Glossary

    • ARP：Address Resolution Protocol • CID：Caller Identity • DND：Do NOT Disturb • DTMF：Dual Tone Multi Frequency • NTP：Network Time Protocol • DMZ：Demilitarized Zone • STUN：Simple Traversal of UDP over NAT • PSTN：Public Switched Telephone Network • Dinstar Technologies Co., Ltd.

Table of Contents