Set Mode Items - Icom IC-M72 Instruction Manual

7
SET MODE

■ SET mode items

D Beep tone function
Selects the key touch beep sound ON or US, or turns sound
OFF.
• ON : A fixed beep sounds (default)
• US : The preset beeps (e.g. do, re, mi) sound
• OFF : Silent operation
Beep tone ON (default)
D Weather alert function
A NOAA broadcast station transmits a weather alert tone
before any important weather announcements. When the
weather alert function is turned ON, any detected weather
alert will make the IC-M72 activate a blinking "WXALT" alert
indicator on the function display and repeatedly sound a
beep tone. The blinking and beeping stops when the radio
is picked up and operated. The previously selected weather
channel is checked any time during standby, or while scan-
ning, when the power save function is activated.
• "ALT" appears when the function is set ON.
Weather alert function
OFF (default)
18
"
Push
Beep tone OFF
"
Push
Weather alert function
ON
D Priority scan function
"
The transceiver has 2 scan types— normal (OFF) and priority
(ON) scans. Normal scan searches all TAG channels in the
selected channel group. Priority scan searches all TAG chan-
nels in sequence while monitoring Channel 16.
Normal scan (default)
D Scan resume timer
"
The scan resume timer can be set as a pause (OFF) or timer
scan (ON). When OFF is selected, the scan pauses until a
received signal disappears. When ON is selected, the scan
pauses for 5 sec. after receiving a signal and then resumes
even if the signal has been received.
Scan resume timer
OFF (default)
"
Push
Priority scan
"
Push
Scan resume timer
ON
"
"