Set Mode; Set Mode Programming - Icom IC-M72 Instruction Manual

■ SET mode programming

SET mode is used to change the condition of 18 transceiver
functions: beep tone function, weather alert function, scan
type, scan resume timer, auto scan function, dual/tri-watch
function, monitor key action, backlighting function, LCD con-
trast selection, auto power save function, self check function,
battery voltage indication, squelch sensitivity, channel name
scroll type, scroll speed, scrambler code, VOX gain and VOX
delay.
D SET MODE ITEMS
Beep tone* Weather alert
VOX delay
VOX gain
Voice scrambler
code †
Scroll speed
Channel name scroll type Squelch sensitivity
D SET mode operation
q Turn power OFF.
w W hile pushing and holding [
the SET mode.
• "BEEP" (Beep tone function setting) appears.
e P ush [
sired item.
r Push [Y]/[Z] to select the desired condition of the item.
t To exit the SET mode, push [16•9].
Scan type
: Push [ ], or while pushing and holding [
: While pushing and holding [
*Starting item
† Availability may differ according to versions.
Battery voltage indication

SET MODE

] , or push [ ] and [Y]/[Z] to select the de-
Scan resume timer
Dual/Tri-watch
Monitor key
], push [Y]
], push [Z]
backlight
contrast
Self-check function
7
] , turn power ON to enter
Auto scan start function
action
Display
LCD
Power save function
6
7
17