Table of Contents
Advertisement
Section 2
FRONT PANEL FEATURES AND CONTROLS POWERTIG 255EXT
POWERTIG 255 EXT
MAIN PANEL FEATURES
1. Protective Cover
2. Main Control Panel
3. Negative Connector
4. Gas Outlet Quick Connect
5. Control Connector
6. Positive Connector
NOTES:
PARAMETERS
N/A
Clear hinged cover protects panel from damage. Keep closed during welding opera-
tions.
Digital
The main control features digital adjustment. It offers features that include Easy Start
Up, Pulse, Advanced AC pulse, Stick welding feature, VRD Stick welding feature, Stick
Hot Start, Arc force control, Lift start Tig, HF start TIG, 2T/4T/Pedal/Amptrol Control,
and error code diagnosis.
DINSE 35-70mm²
Location of the negative terminal connection. This is a standard 35 series connector.
For Stick: Work clamp Cocnnection. For TIG: Torch connection.
9mm
Connects the gas to the TIG torch. To connect: Push the torch fitting into the connect-
or until the collar slides forward with a click. To Release: Slide the outer collar back.
7 Pin
Connect the foot pedal , amptrol or torch switch to this socket to control the welder.
(Panasonic type)
Only one control connector can be plugged in at one time. If the torch has a torch
switch feature or hand amptrol feature, tie the loose connector back or leave it hang-
ing while using the pedal.
DINSE 35-70mm²
Location of the positive terminal connection. This is a standard 35 series connector.
For Stick: Torch Connection (most electrodes). For TIG: Work Clamp Connection.
QUICK SETUP AND USE GUIDE
PURPOSE
16
Hide quick links:
Advertisement
Table of Contents
