Quick Setup Guide, Tig Torch/Cooler Connection; Tig Connections - Everlast Powertig 255 EXT Operator's Manual

Section 2
TORCH (-)
9/17 SERIES TORCH
35 SERIES CONNECTOR
AIR-COOLED TORCH
35 SERIES CONNECTOR
WATER-COOLED TORCH
18/20 SERIES TORCH
WATER COOLER
(Optional)
QUICK SETUP GUIDE: TIG CONNECTIONS
GAS (Ar)
CONTROL
26 SERIES TORCH
CONTROL
COOLANT IN (TO RED COUPLING)
INPUT
!
WA
OUTPUT
COOLANT OUT ( TO BLUE COUPLING)
QUICK SETUP AND USE GUIDE
GAS
CONTROL
GAS (Ar)
NOTE: Torch switch and foot pedal
control cannot be used at the same time.
IMPORTANT!
ARGON GAS LINE SHOULD BE TAGGED AS "Ar." IF NOT,
TAKE DRY, COMPRESSED AIR AND GENTLY BLOW THROUGH THE LINES TO
DISCOVER WHICH LINE EXHAUSTS THROUGH THE TORCH OR THROUGH
THE RETURN LINE. ON SOME BRANDS OF TORCHES, THE WATER LINES ARE
COLOR CODED: BLUE FOR COOL WATER SUPPLY AND RED FOR HOT
WATER RETURN. OTHER BRANDS MAY VARY. COOLER FITTINGS HOWEV-
ER ARE COLOR CODED BLUE AND RED. BLUE COOLER FITTING IS FOR
WATER SUPPLY OUT TO THE TORCH. RED COOLER FITTINGS IS FOR
RETURN WATER FROM THE TORCH, EXITING THE DINSE CONNECTOR.
PLEASE BE CAREFUL NOT TO INSTALL THE TORCH INCORRECTLY OR
WATER WILL FLOW FROM THE TORCH HEAD. ALWAYS DOUBLE CHECK TO
BE SURE AND MARK THEM WITH EITHER COLORED TAPE OR TAG WATER
AND GAS LINES WITH ADHESIVE LABELS FOR EASY IDENTIFICATION.
12
35 SERIES CONNECTOR
CONTROL
FOOT PEDAL
WORK (+)