TP-Link MC110CS User Manual page 11

Name
PWR
LFP
FX
Link/Act
SPD
FDX/Col
TP
Link/Act
Status
On Power on.
Off Power off.
On The Link Fault Pass Through function enable.
Off The Link Fault Pass Through function disable.
On There's a valid link.
The converter is receiving or transmitting
Flashing
data from the fiber optic connector.
Off There's no valid link.
The TP port is connected to 100Base-Tx
On
The TP port is connected to 10Base-Tx
Off
device or no connection.
The TP port is operating in Full-Duplex.
On
d
Flashing There's a collision.
Off The TP port is operating in Half-Duplex mode.
On There's a valid link.
The converter is receiving or transmitting
Flashing
data from the TP port.
Off There's no connection on the TP port.
Indication
5