Installation Procedure - TP-Link MC110CS User Manual

3.1 Installation Procedure

Use a fiber cable to connect two converters, or connect a converter
with a 100Base-FX Device.
1. Connection of a Converter and a 10/100Base-TX Device (HUB or
Switch).
Make sure that the length of the Cat.5 twisted pair cable
•
between the 10/100Base-TX device and the converter is less
than 100 meters.
Connect one end of the Cat.5 twisted pair cable to the RJ45
•
jack on the converter and the other end of the cable to the
RJ45 jack on the 10/100Base-TX device.
2. Connection of two Converters or a Converter and a 100Base-FX
Device.
Use a SC fiber cable to connect the two Converters' SC
•
connector or the SC connecter of a Converter and a
100Base-FX Device.
3. Turn on the power.
12