Link Fault Pass Through Function - TP-Link MC110CS User Manual

Wdm fast ethernet media converter
Hide thumbs Also See for MC110CS:
Table of Contents

Advertisement

The Mode Of The Device
TP:AUTO; LFP ON
TP:AUTO; LFP OFF
TP:FORCE,100M,FULL; LFP ON
TP:FORCE,100M,FULL; LFP OFF
TP:FORCE,100M, HALF; LFP ON
TP:FORCE,100M, HALF; LFP OFF
TP:FORCE,10M,FULL; LFP ON
TP:FORCE,10M,FULL; LFP OFF
TP:FORCE,10M, HALF; LFP ON
TP:FORCE,10M, HALF; LFP OFF
Note:
1) We suggest leaving the switches on TP_AUTO, TP_100M,
TP_FDX, and LFP_ON, because this configuration is suitable for
lots of situations.
2) You have to reset the converter after configuring the switches.

1.5.3 Link Fault Pass Through Function

In common situations, when one side of the link fails, the other side
continues transmitting packets, and waiting for a response that never
arrives from the disconnected side.
TP_AUTO, TP_100M, TP_FDX,
LFP_ON
TP_AUTO, TP_100M, TP_FDX,
LFP_OFF
TP_DIS, TP_100M, TP_FDX,
LFP_ON
TP_DIS, TP_100M, TP_FDX,
LFP_OFF
(TP_DIS or TP_AUTO), TP_100M,
TP_HDX, LFP_ON
(TP_DIS or TP_AUTO), TP_100M,
TP_HDX, LFP_OFF
TP_DIS, TP_10M, TP_FDX,
LFP_ON
TP_DIS, TP_10M, TP_FDX,
LFP_OFF
(TP_DIS or TP_AUTO), TP_10M,
TP_HDX, LFP_ON
(TP_DIS or TP_AUTO), TP_10M,
TP_HDX, LFP_OFF
7
Switch

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mc111csMc112cs

Table of Contents