Citrus Press; To Use The Citrus Press; To Use Your Mill; Care & Cleaning - Kenwood FP580 series Instruction Manual

citrus press

k
(if supplied)
24
Use the citrus press to squeeze
the juice from citrus fruits (eg
oranges, lemons, limes and
grapefruits).
cone
sieve
to use the citrus
press
1 Fit the drive shaft and bowl
onto the power unit.
2 Fit the sieve into the bowl -
ensuring the sieve handle is
locked into position directly
k h
over the bowl handle .
3 Place the cone over the drive
shaft turning until it drops all the
k i
way down .
4 Cut the fruit in half. Then switch on and press the fruit onto the
cone.
l
The citrus press will not operate if the sieve is not
locked correctly.
mill
k
25
Use the mill for milling herbs, nuts and coffee
beans.
blade unit
sealing ring
jar
sprinkler lid
important
l
To ensure long life of your mill, never run for
longer than 30 seconds. Switch off as soon as
you've got the right consistency.
l
Don't process spices - they may damage the
plastic.
l
The machine won't work if the mill is fitted
incorrectly.
l
Use for dry ingredients only.

to use your mill

1 Put your ingredients into the jar. Fill it no more
than half full.
2 Fit the sealing ring into the blade unit.
3 Turn the blade unit upside down. Lower it into the jar, blades
down.
4 Screw the blade unit onto the jar until it is finger tight.
5 Place the mill onto the power unit and turn to lock (see "to use
your liquidiser").
6 Switch on to maximum speed or use the pulse control.
7 After milling, you can replace the blade unit with the sprinkler lid
and shake out your food.
l
The sprinkler lid is not airtight.
hints
l
Herbs are best milled when clean and dry.
k i
care & cleaning
l
Always switch off and unplug before cleaning.
l
Handle the blades and cutting discs with care - they are
extremely sharp.
k h
l
Some foods may discolour the plastic. This is perfectly normal
and won't harm the plastic or affect the flavour of your food. Rub
with a cloth dipped in vegetable oil to remove the discolouration.
power unit
l
Wipe with a damp cloth, then dry. Ensure that the interlock area
is clear of food debris.
l
Store excess cord in the storage area at the back of the
machine.
liquidiser/mill
1 Empty the jug/jar before unscrewing it from the blade unit.
2 Wash the jug/jar by hand.
3 Remove and wash the sealing ring.
4 Don't touch the sharp blades - brush them clean using hot
soapy water, then rinse thoroughly under the tap. Don't
immerse the blade unit in water.
5 Leave to dry upside down.
twin beater geared whisk
l
Detach the beaters from the drive head by gently pulling them
free. Wash in warm soapy water.
l
Wipe the drive head with a damp cloth, then dry. Do not
immerse the drive head in water.
all other parts
l
Wash by hand, then dry.
l
Alternatively they can be washed on the top rack of your
dishwasher.
service & customer care
l
If the cord is damaged it must, for safety reasons, be replaced
by Kenwood or an authorised Kenwood repairer.
UK
If you need help with:
l
Using your machine
l
Servicing or repairs (in or out of guarantee)
call Kenwood customer care on 023 92392333. Have your
model number ready (e.g. FP580) and date code
(5 digit code e.g. 13L35). They are on the underside of the
power unit.
spares and attachments
call 0844 557 3653
other countries
Contact the shop where you brought the food processor.
l
Designed and engineered by Kenwood in the UK.
l
Made in China.
7