System Utilities; Change Password - Black Box 11N 2T2R Manual

Chapter 3: Installation and Configuration
After you finish the settings, click on the Apply button. The following message will be displayed:
Figure 3-44. Settings saved successfully prompt.
When you see this message, the settings you made are successfully saved. Click on the Continue button to go back to the previ-
ous page and continue setting other items, or click on the Apply button to restart the wireless access point. The changes will take
effect after about 30 seconds.

3.10 System Utilities

This access point provides some control functions including password, IP address management, and DHCP server functions. Click
System Utility on the left of the Web management interface to access these functions. Below are detailed descriptions of every
control function.

3.10.1 Change Password

You can change the password used to enter the Web configuration menu for this wireless access point.
Click System Utility on the left, and the following screen will be displayed:
Figure 3-45. Password settings screen.
Page 47