Black Box 11N 2T2R Manual page 43

11N 2T2R Wireless Access Point
Option
Pre-shared Key
Use internal MD5/PEAP
RADIUS Server
RADIUS Server IP
address
RADIUS Server Port
RADIUS Server Password Input the RADIUS authentication server's password here.
After you finish the settings, click on the Apply button, and the following message will be displayed:
When you see this message, the settings you made are successfully saved. Click on the Continue button to go back to the previ-
ous page and continue setting other items, or click on the Apply button to restart the wireless access point. The changes will take
effect after about 30 seconds.
Page 42
Table 3-15. WPS RADIUS screen options.
Description
Input a pre-shared key according to the key format you selected here. For security, don't use
simple words.
Uses a built-in RADIUS Server (refer to Section 3.8) instead of an external RADIUS server. If you
check this box, the value in the following three fields will be ignored.
Input the RADIUS authentication server's IP address here.
Input the RADIUS authentication server's port number here. The default value is 1812.
Figure 3-38. Settings saved successfully prompt.
724-746-5500 | blackbox.com