802.1X Authentication - Black Box 11N 2T2R Manual

3.7.5 802.1x Authentication

You can enable 802.1x user identification (based on RADIUS user authentication server) by checking the Enable 802.1x
Authentication box when you select Disable or WEP as the encryption type. The following screen will be displayed:
Option
Select SSID
Use internal MD5/PEAP
RADIUS Server
Enable 802.1x
Authentication
RADIUS Server IP
address
RADIUS Server Port
RADIUS Server Password Input the RADIUS authentication server's password here.
After you finish the settings, click on the Apply button, and the following message will be displayed:
Figure 3-39. 802.1x screen.
Table 3-16. 802.1x options.
Description
Choose the SSID you want to configure.
Uses a built-in RADIUS Server (refer to the next section) instead of an external RADIUS server.
If you check this box, the value of the internal RADIUS server fields will be ignored.
Enable or disable 802.1x user authentication.
Input the RADIUS authentication server's IP address here.
Input the RADIUS authentication server's port number here. The default value is 1812.
Figure 3-40. Settings saved successfully prompt.
Chapter 3: Installation and Configuration
Page 43