Station Infrastructure - Black Box 11N 2T2R Manual

3.4.2 Station-Infrastructure
In this mode, you can connect the access point to an Ethernet device such as a TV and game player to enable the Ethernet device
to be a wireless station and join a wireless network through an access point or AP router.
Option Description
Band Select the wireless band you wish to use. By selecting a different band setting, you'll be able to allow or
deny the wireless client of a certain band.
If you select 2.4GHz (B), 2.4GHz (N), or 2.4GHz (G), only wireless clients using the wireless band you
select (802.11b, 802.11 Draft-N, or 802.11g) can connect to this access point.
If you select 2.4GHz (B+G), then only wireless clients using the 802.11b and 802.11g band can connect
to this access point.
If you want to allow 802.11b, 802.11g, and 802.11 Draft-N clients to connect to this access point, select
2.4GHz (B+G+N).
Main ESSID Input the ESSID (the name used to identify this wireless access point) here. You can input up to 32
alphanumerical characters.
NOTE: ESSID IS CASE SENSITIVE.
Site Survey When you use this access point as a wireless station for an Ethernet network device to have wireless
capability, you have to associate it with a working access point. Click on the Select Site Survey button,
and a Wireless Site Survey Table will pop up. The table lists all available access points nearby. You can
select one access point in the table and it will join the wireless LAN through this access point.
Chapter 3: Installation and Configuration
Figure 3-15. Station infrastructure mode screen.
Table 3-5. Station infrastructure mode settings.
Page 25