Black Box 11N 2T2R Manual page 22

Click Home on the left, and the system status and information displays, as shown below (see Figure 3-11).
Option
Up Time
Hardware Version
Runtime Code Version
Mode
ESSID
Channel Number
Security
BSSID
Associated Clients
IP Address
Subnet Mask
Default Gateway
MAC address
Figure 3-11. Status and information screen.
Table 3-1. Status and information screen options.
Description
Displays the total time passed since the wireless access point was powered on.
Displays the hardware version. Use this information when you need online help from Black Box
Technical Support.
Displays the current firmware version. If you want to perform firmware upgrade, this number
will help you to determine if you need an upgrade.
Displays the current wireless operating mode (see Section 3.4).
Displays the current ESSID (the name used to identify this wireless access point).
Displays the current wireless channel number.
Displays the current wireless security setting.
Displays the current BSSID (a unique identification name for this access point, it cannot be
modified by user).
Displays the number of connected wireless clients.
Displays the wireless access point's IP address.
Displays the IP address' net mask.
Displays the default gateway's IP address.
Displays the LAN interface's MAC address.
Chapter 3: Installation and Configuration
Page 21