Mac Filtering - Black Box 11N 2T2R Manual

Option
Authentication Client
After you finish the settings, click on the Apply button, and the following message will be displayed:
When you see this message, the settings you made are successfully saved. Click on the Continue button to go back to previous
page and continue setting other items, or click on the Apply button to restart the wireless access point. The changes will take
effect after about 30 seconds.

3.9 MAC Filtering

Another security measure you can use to keep hackers and intruders away is MAC filtering. You can pre-define a so-called
"white-list" that contains MAC addresses for the wireless clients you trust. All other wireless clients with a MAC address that is
not in your list will be denied access by the wireless access point.
Chapter 3: Installation and Configuration
Table 3-17 (continued). Radius server options.
Description
Add an allowed radius client IP address here. Input client IP, secret key, then re-type
the secret key in the corresponding field, and click on the Add button to add the IP
address to the radius server database. Click on the Reset button to clear the text you
typed in the above three fields.
All current IP addresses will be listed here. If you want to delete one or more address-
es, check the Select box for that address, and click on the Delete Selected button.
Click on the Delete All button to delete all addresses in the radius server database.
Click on the Reset button to uncheck all Select boxes.
Figure 3-42. Settings saved successfully prompt.
Page 45